Cable activo CLUB3D HDMI a USB Type-C 4K60Hz M/M 1,8 m/6 ft

The Club 3D CAC-1334 is an active HDMI to USB‑C cable that transmits video and audio from an HDMI source (laptop, tablet, PC) to USB‑C displays that support DisplayPort 1.2 Alternate Mode, such as TVs, monitors and projectors. The cable is uni‑directional and works only from an HDMI Type A source to a USB Type‑C display. It is 1.8 m long and supports resolutions up to 4096 x 2160 at 60 Hz. The product complies with ROHS, FCC and CE EMI requirements; for best results, update your TV or display firmware to the latest version.

Advantages

This active Club 3D cable provides a direct HDMI Type A to USB Type‑C connection without requiring a separate adapter or converter box. It supports DisplayPort 1.2 Alternate Mode up to 4K@60Hz, offers a 1.8 m length for flexible placement, and meets common regulatory EMI standards (ROHS, FCC, CE) for reliable signal transmission.

Suitable for

• Connecting an HDMI output on a laptop, desktop or media player to a USB‑C monitor, TV or projector (DP 1.2 Alt Mode required)
• Transmitting 4K@60Hz video and audio from HDMI source devices to USB‑C displays
• Home media setups, small office displays and classroom/projector connections

Key specifications

• Cable length: 1.8 m
• Connector 1: HDMI Type A (Standard)
• Connector 2: USB Type‑C (DP 1.2 Alternate Mode required on display)
• Maximum resolution: 4096 x 2160 @ 60 Hz (DP 1.2)
• Direction: Uni‑directional (HDMI source → USB‑C display)
• Compliance: ROHS, FCC, CE EMI

How to use

Connect the HDMI Type A end to the HDMI output of your source device (laptop, PC, tablet or media player). Plug the USB‑C end into the display's USB‑C port that supports DisplayPort 1.2 Alternate Mode. Power on both devices and select the appropriate input on the display if required. The cable is uni‑directional: it will not transmit from USB‑C source to an HDMI display.

Recommendations

Ensure the USB‑C display supports DisplayPort 1.2 Alternate Mode and update the display firmware to the latest version. For consistent 4K@60Hz performance, use HDMI output settings on the source device that match the cable's DP 1.2 capabilities.