Cable CLUB3D DisplayPort 1.4 HBR3 8K 28AWG M/M 3m /9,84ft

The CLUB3D DisplayPort 1.4 HBR3 cable enables connection of a DisplayPort‑capable PC or laptop to an Ultra HD monitor or other DisplayPort display. It supports DisplayPort 1.4 features including Display Stream Compression (DSC) 1.2, Forward Error Correction and up to 32 inline audio channels, and is designed to carry 8K resolution at 60Hz over a 3 m length. The cable is RoHS, WEEE and CE compliant and uses locking DisplayPort connectors for a secure fit.

Advantages

The 3 m CLUB3D DisplayPort Cable supports 8K@60Hz and HBR3 bandwidth while the UltraFlex jacket reduces risk of damage from bending. Locking DisplayPort connectors keep the connection secure and the one‑touch latch allows easy unplugging. The cable is lightweight (0.219 kg) and finished in black for compatibility with most setups.

Suitable for

• Connecting a gaming PC or laptop to an 8K or 4K monitor
• High‑resolution video and multi‑channel audio transfer
• Workstations and content‑creation setups requiring DSC and FEC support

Key specifications

• Standard: DisplayPort 1.4 (HBR3)
• Resolution support: up to 8K@60Hz (with DSC where applicable)
• Length: 3 m
• Connectors: DisplayPort to DisplayPort (locking)
• Cable gauge: 28 AWG
• Weight: 0.219 kg
• Colour: Black
• Compliance: RoHS, WEEE, CE

How to use

Connect one DisplayPort connector to the DisplayPort output on your PC or laptop and the other to the DisplayPort input on the monitor or display. Ensure both devices support the desired resolution and enable DSC or relevant display settings if required. Press the built‑in latch button to release the locking connector when disconnecting.

Recommendations

For best results, route the cable without tight bends and avoid repeated sharp kinks. Verify monitor and GPU settings for 8K/60Hz operation and enable Display Stream Compression (DSC) and Forward Error Correction (FEC) in device menus if necessary.