Conmutador VGA DeLOCK 87758 2 puertos manual bidireccional

The DeLOCK 87758 is a manual bidirectional 2-port VGA switch that allows connecting VGA devices such as monitors, projectors or computers. It supports a maximum resolution of 1920 x 1080 pixels and is housed in a durable plastic casing with compact dimensions (180.5 × 89 × 50 mm). The switch enables either sharing one VGA display between two computers or connecting two displays to one computer via a single VGA port.

Advantages

The switch offers manual, reliable switching between two VGA sources or two VGA displays without the need for software or power adapters. Its compact plastic enclosure and standard VGA connectors provide a simple plug-and-play solution compatible with common VGA-equipped devices. Maximum supported resolution of 1920 x 1080 ensures clear video output for most legacy and office setups.

Suitable for (tasks / use cases)

• Sharing one VGA monitor or projector between two computers
• Connecting two VGA monitors or projectors to a single computer (manual switching)
• Conference rooms, classrooms or office workstations with legacy VGA equipment
• Testing or switching between VGA-equipped devices during maintenance

Key specifications

• Brand: DELOCK
• Model: 87758
• Type: Manual bidirectional VGA switch, 2 ports
• Video port type: VGA
• Maximum resolution: 1920 x 1080 pixels
• Housing material: Plastic
• Dimensions (W × D × H): 180.5 × 89 × 50 mm
• MPN: 87758
• EAN: 4043619877584

How to use

Connect the VGA cable from the computer or source device to one of the VGA input ports on the switch and connect the VGA cable from the monitor or projector to the corresponding output port. Use the manual selector on the unit to choose which device or display is active. No external power supply or software installation is required. Ensure all devices are powered off when connecting or disconnecting cables to avoid signal issues.

Recommendations

For optimal performance, use quality shielded VGA cables and avoid excessively long cable runs. When switching devices, allow a few seconds for the display to detect the signal. This switch is intended for analog VGA signals and may not support digital adapters without an active converter.