Contactor modular Finder 6K.14.8.230.4310 bobina 230 V AC 25 A 4 NO carril DIN

Control lighting and heating loads in residential and commercial distribution boards with the Finder 6K.14.8.230.4310 modular contactor. This 4-pole normally open (NO) device switches up to 25 A per pole at 230 V AC, making it suitable for circuits where multiple lines must be switched simultaneously.

Key specifications

• Coil voltage: 230 V AC
• Contact configuration: 4 NO (normally open)
• Rated current (AC-1): 25 A
• Number of poles: 4
• Contact material: AgNi (silver nickel)
• Mounting: DIN rail (EN 60715)
• Module width: 4 modules (70 mm)
• Electrical life (AC-1): 100,000 operations
• Mechanical life: 1,000,000 operations
• Operating temperature: -40 to +70 °C
• Protection degree: IP20
• Rated insulation voltage (Ui): 400 V AC
• Rated impulse withstand voltage (Uimp): 4 kV
• Coil power consumption (AC): 4.5 VA
• Terminal type: screw terminals
• Max switching voltage: 400 V AC
• Rated frequency: 50/60 Hz

Why choose it

The contactor's compact 4-module width saves space on the DIN rail, while the silver nickel contacts provide reliable switching for demanding loads. Its wide operating temperature range allows installation in environments from cold lofts to hot plant rooms.

Ideal use cases

• Switching lighting groups in residential and commercial panels
• Controlling electric heating or water heater circuits
• Automating loads via time switches or building management systems

Good to know

The screw terminals accept solid or stranded conductors, and the contactor is designed for use in circuits up to 400 V AC. It meets the requirements of EN 61095 for household and similar fixed electrical installations.