CORE Icon Integrated Headset rosa - 1 1/8" sellado ACB, 65g, tapa superior de aluminio CNC

Loose or worn steering ruins your ride. The CORE Icon Integrated Headset replaces that tired unit with a precision-engineered assembly that keeps your front end tight and responsive. Built to take the bangs and grit of BMX parks and street riding, this low-profile headset delivers silky-smooth rotation while protecting the bearings from dirt and moisture.

Who is it for

The Icon is for BMX riders and freestyle scooter enthusiasts who need a dependable upgrade for a 1 1/8" fork. Whether you’re hitting big air or grinding rails, the sealed bearings and alloy top cap hold up to hard impacts and constant steering loads. It fits common integrated head tubes (IS42/28.6 | IS42/30) without adapters.

Main features

• Integrated design with 45°/45° sealed angular contact bearings (ACB) for smooth, precise steering.
• CNC-machined 6061-T6 aluminium top cap reduces weight without sacrificing strength.
• Low-profile design keeps the front of your bike clean and compact.
• Compatible with 1 1/8" (28.6mm) steerer tubes and integrated head tubes.
• Sealed bearings keep dirt, dust and moisture out for longer life.
• Ultra-light total weight of just 65g.

Specifications

• Type: Integrated
• Steerer tube diameter: 1 1/8" (28.6mm)
• Head tube compatibility: IS42/28.6 | IS42/30
• Crown race diameter: 30mm
• Bearing type: Sealed angular contact (ACB)
• Bearing angle: 45° / 45°
• Bearing dimensions (ID x OD x W): 30.15mm x 41.8mm x 6.5mm
• Top cap material: CNC-machined 6061-T6 aluminium
• Finish: Anodized
• Colour: Pink
• Weight: 65g
• In the box: Top cap, compression ring, 2x sealed bearings, 2x 5mm spacers, 1x 10mm spacer

Tips

Before installation, clean the head tube and make sure the bearing seats are free of old grease or debris. Press each bearing in evenly to avoid damaging the races. Fit the crown race onto the fork, then assemble with the compression ring and spacers. Tighten the top cap to preload the headset, then align the stem and tighten the steerer clamp bolts to the torque specified by your fork manufacturer.