Cargador portátil para vehículo eléctrico DE 3 kW V2, 6 m

The 3kW V2 portable EV charger allows for convenient charging of electric vehicles equipped with a Type 2 connector. Thanks to its 6-meter cable and standard Schuko plug, it can be plugged into a standard wall outlet without the need for a dedicated charging station. The device operates at 230 V and delivers a maximum power of 3.7 kW. It also allows you to adjust the current and set a charging delay ranging from 0.5 to 12 hours, enabling you to better tailor its operation to your individual needs.

• Convenient Operation and Parameter Monitoring

The charger is equipped with an LED display that provides access to key information about the device’s operation. Among other things, you can check the current power, voltage, and current, the amount of energy supplied in kWh, the charging time, and the status of the connection to the vehicle, the ground connection, and the Wi-Fi network. Operation is made easier by a button that allows you to adjust settings, configure Wi-Fi, and pause and resume charging. Additionally, a colored LED indicates the device’s current status—from standby mode and vehicle connection, through active charging, to error detection. After 5 minutes of inactivity, the charger automatically enters sleep mode, from which it can be awakened by pressing the button or by connecting a Type 2 connector.

• Advanced Safety Features and Durable Construction

The charger is equipped with a Type A residual current device (RCD) rated at 30 mA AC + 6 mA DC, as well as protection systems against current overload, incorrect voltage, overheating, and grounding issues. The device also detects CP connection errors, relay sticking, and leakage current, and can automatically limit the charging current in the event of excessive temperature rise. The control module features an IP66 protection rating, while the Type 2 connector has an IP55 rating. The charger can operate at temperatures ranging from -25°C to +50°C, and its compliance with the EN 62752:2024 and EN 62196 standards, as well as its CE and DEKRA certifications, confirm that it meets the specified technical requirements.

• 3kW V2 Portable EV Charger
• Cable Length: 6 m
• Power Plug: Schuko
• Charging Connector: Type 2
• Number of Phases: 1
• Supply voltage: 230 V AC ±10%, 50 Hz
• Maximum power: 3.7 kW (230 V at 16 A)
• Current Range: 6–16 A
• Current Adjustment via Button: 6–13 A
• Charging Start Delay: 0.5–12 h
• Display: LED
• Connectivity: Wi-Fi
• Features: Current adjustment, charging delay, pause and resume charging, no-ground mode, automatic sleep
• Residual current protection: Type A 30 mA (AC) + 6 mA (DC)
• Protections: Against leakage current, current overload, overvoltage and undervoltage, overheating, ground faults, relay sticking, and CP errors
• Control module protection rating: IP66
• Connector protection rating: IP55
• Operating temperature: From -25°C to +50°C
• Control module dimensions: 180 × 94 × 46 mm
• Certifications: CE, DEKRA
• Standards: EN 62752:2024, EN 62196