Dell DDR4 - módulo - 32 GB - DIMM 288-PIN - 2933 MHz / PC4-23400

The DELL DDR4 32GB 2933MHz ECC memory module is a 288-pin DIMM designed for use in compatible desktops and servers. With 32 GB capacity and DDR4 technology operating at 2933 MHz, this module provides additional system memory to support multitasking and memory-intensive applications. Integrated ECC (Error-Correcting Code) functionality detects and corrects single-bit memory errors to improve reliability and maintain system stability during prolonged operation.

Advantages

This 32 GB DDR4 module delivers a balance of capacity and speed suitable for professional workloads. ECC error correction reduces the risk of data corruption in critical environments, while the 1.2 V operating voltage helps limit power consumption and thermal output. The 288-pin DIMM form factor ensures compatibility with standard server and workstation memory slots that accept DDR4 modules at 2933 MHz.

Suitable for

• Server and workstation memory expansion
• Virtualization hosts and database servers
• Scientific computing and engineering applications
• High-density multitasking and content creation systems

Key specifications

• Capacity: 32 GB
• Memory type: DDR4
• Clock speed: 2933 MHz
• Form factor: 288-pin DIMM
• ECC: Yes (error-correcting code)
• Voltage: 1.2 V

How to use

Power down the system and disconnect it from the mains before installing the memory module. Open the chassis to access the motherboard memory slots, consult the motherboard or system manual for supported DIMM slot population and order. Align the notch on the 288-pin DIMM with the slot key and press evenly on both ends of the module until the retaining clips engage. After installation, reconnect power and start the system to verify that the new memory is recognized in the firmware or operating system. If the system supports memory diagnostics, run a memory check to confirm stable operation.

Recommendations

For systems used in critical or production environments, install memory modules in matched pairs or according to the server vendor’s supported configurations, enable ECC in the system firmware if required, and follow the motherboard manufacturer’s guidelines for supported speeds and voltage to ensure optimal stability and performance.