DeLOCK cable de alimentación interno 60137 0,5 m SATA 15 pines Molex 4 pines

The DeLOCK 60137 internal power cable is 0.5 m long and has a SATA 15-pin connector on one end and a Molex 4-pin connector on the other. It allows a device with a 4‑pin Molex power connector to be powered from a PSU output with a SATA 15‑pin interface. The compact length is suitable for installations inside a computer case where space is limited and cable routing needs to be tidy.

Advantages

This cable provides a simple, passive conversion between SATA 15‑pin power and Molex 4‑pin power without the need for additional adapters. Its 0.5 m length reduces excess cable inside the chassis, and the standard connectors ensure compatibility with common power supplies and legacy devices. The cable is colour-coded for easy identification.

Suitable for

• Connecting legacy 4‑pin Molex devices (e.g., older fans, optical drives) to a SATA 15‑pin power output
• Compact PC builds where short cable length is required
• Upgrading or repairing systems with mixed connector types

Key specifications

• Length: 0.5 m
• Connector 1: SATA 15‑pin
• Connector 2: Molex (4‑pin)
• Product colour: Black, Red, White, Yellow
• Brand: DELOCK, MPN: 60137

How to use

Power off the computer and disconnect it from mains power before installation. Insert the SATA 15‑pin connector into the PSU's SATA power output and plug the Molex 4‑pin connector into the device's Molex power socket, ensuring correct orientation and a secure fit. Reconnect mains power and power on the system to verify the device receives power.

Recommendations

Use this cable for low‑current devices compatible with Molex 4‑pin power. Avoid forcing connectors and inspect for proper seating after installation. Do not use the cable if any connector or wire shows visible damage.