Despertador radiofónico digital TFA-Dostmann 60.5016.01 negro rango de temperatura -10 a 50 °C

The TFA-Dostmann 60.5016.01 is a black digital radio-controlled projection alarm clock that displays time and room temperature. Time is projected as red digital numbers onto a wall or ceiling; the projected display also shows the ambient temperature and an alarm symbol when the alarm is set. The device receives precise time via the DCF-77 signal and shows date and day of week automatically. The housing is plastic and the clock can be powered by AC adapter (included) for continuous projection or by AA batteries for portable operation.

Advantages

This alarm clock provides a clear, easy-to-read projected time and temperature on the wall or ceiling, with two brightness levels for both projection and display illumination and an option to switch them off. The DCF-77 radio-controlled reception ensures accurate timekeeping and automatic date/day display. An alarm with snooze function is integrated for brief extra sleep; when powered by batteries, projection and illumination can be activated temporarily by button, while permanent projection requires the supplied adapter. The temperature range is suitable for indoor monitoring.

Suitable for

• Bedroom use for checking time at night without turning toward the clock
• Monitoring room temperature to maintain a sleep-friendly climate
• Use where automatic radio-controlled time setting is preferred
• Portable use on batteries for short-term projection when mains power is not available

Key specifications

• Brand: tfa dostmann
• Model: 60.5016.01
• Color: Black
• Time reception: DCF-77 radio-controlled
• Projection: red digital numbers onto wall/ceiling, two brightness levels, can be switched off
• Display illumination: two brightness levels, can be switched off
• Temperature range: -10 to 50 °C (measured ambient temperature)
• Power: AC adapter (included) or AA batteries
• Dimensions (W×H×D): 141 × 51 × 91 mm
• Housing material: plastic
• EAN: 4009816033819

How to use

Position the clock on a bedside table or other stable surface with the projector aimed at the desired portion of wall or ceiling. Connect the supplied AC adapter for continuous projection, or insert AA batteries for portable operation; when using batteries, press the projection/illumination button to activate them for a few seconds. Set the alarm time using the controls and confirm activation — the alarm symbol will appear on both the display and the projection. Use the snooze button to delay the alarm for a few additional minutes.

Recommendations

For a clear projection, place the clock 1–3 metres from the projection surface and aim the projector toward a flat, light-coloured area. Use the AC adapter for permanent projection; battery power should be used for temporary or portable operation only. Keep the device away from direct heat sources and avoid exposing it to moisture to ensure accurate temperature readings.