Detector de humo Fibaro FGSD-002 óptico inalámbrico

Smoke Sensor 2, Z-Wave, 50m range, CR123A Battery, white. The Fibaro FGSD-002 is an optical wireless smoke sensor designed for early detection of fire and integration into Z-Wave smart home systems. The device combines an optical smoke chamber, a built-in temperature sensor and an LED indicator with an integrated siren to signal alarm conditions and to communicate status within the Z-Wave network. It is intended for wall or ceiling mounting and for operation in normally ventilated indoor spaces.

Advantages

The Fibaro Smoke Sensor provides early-stage smoke detection by optical sensing, alerts via sound and visual indicators, and transmits Z-Wave control commands to other devices in the network. The built-in temperature sensor can be used to trigger temperature-based alarms or notifications. Battery operation (CR123A) enables wireless placement without hardwiring, and the compact white housing is suitable for typical residential and commercial interiors.

Suitable for

• Homes and apartments
• Small offices and retail spaces
• Z-Wave smart home systems and automation setups
• Wall or ceiling installation where wireless detection is required

Key specifications

• Model: Fibaro FGSD-002 (Smoke Sensor 2)
• Detection type: Optical (photoelectric) smoke sensor
• Wireless protocol: Z-Wave
• Effective wireless range: up to 50 m (open space, nominal)
• Power supply: CR123A battery
• Alerts: built-in siren and LED visual indicator
• Mounting: wall or ceiling
• Color: white

How to use

Mount the detector on a wall or ceiling according to the manufacturer’s mounting recommendations, preferably in the center of the room or along escape routes. Insert a CR123A battery and perform device inclusion to the Z-Wave network using your controller. Test the alarm and LED indicators after installation to confirm proper operation. Follow local regulations for placement and spacing of smoke detectors.

Recommendations

Place the sensor away from cooking appliances and bathrooms to reduce false alarms; test regularly and replace the CR123A battery as recommended by the manufacturer. Ensure the device remains within the Z-Wave network range for reliable communication.