Disco de sierra circular Metabo 6.28041.00 grosor 1,8 mm

Circular saw blade HW/CT 216 x 30, 48 WZ 5° neg. The Metabo 6.28041.00 circular saw blade has a thickness of 1.8 mm and is designed for use with compatible Metabo circular saws. The blade construction and tooth geometry are intended to deliver precise, clean cuts across a range of materials while maintaining durability for repeated use.

Advantages

The 1.8 mm plate thickness balances stiffness and reduced kerf for efficient cutting. Tungsten carbide (HW/CT) teeth offer improved wear resistance compared with high-speed steel, and the 48-tooth configuration with a 5° negative hook angle provides controlled feed and a smooth cut finish. The 30 mm bore and standard diameter suit many bench and handheld saw models.

Suitable for

• Cross-cutting and rip cuts in wood and wood-based panels
• Applications requiring fine, smooth cut edges
• Use on compatible Metabo circular table saws and handheld saws with 30 mm arbor

Key specifications

• Brand: Metabo
• Model / MPN: 6.28041.00 (628041000)
• EAN: 4007430176356
• Diameter: 216 mm
• Bore: 30 mm
• Number of teeth: 48
• Plate thickness: 1.8 mm
• Tooth type: HW/CT (tungsten carbide tipped)
• Hook angle: 5° negative

How to use

Mount the blade onto a power saw with a 30 mm arbor following the saw manufacturer’s instructions and ensuring the saw is disconnected from power. Verify the blade rotation direction matches the arrow on the blade and tighten the flange/nut to the specified torque. For best results, set an appropriate feed rate and blade speed for the material being cut, and secure workpieces before cutting.

Recommendations

Use appropriate personal protective equipment (eye protection, hearing protection, and gloves where applicable). Inspect the blade before each use for damage or excessive wear and replace if necessary. For optimal life and cut quality, avoid cutting materials that generate excessive heat or contain metal contamination; maintain correct saw settings and perform routine blade cleaning and sharpening as recommended by the saw manufacturer.