Docking station Unitek 51642 para unidades SATA de 2,5" y 3,5", USB-C 10 Gbit/s, 2 bahías, Aluminio

Unitek 51642 is a 2-bay docking station designed for 2.5" and 3.5" SATA SSDs and HDDs. It features an aluminium housing with LED activity indicators, a USB‑C upstream port that supports data transfer rates up to 10 Gbit/s, UASP and TRIM support, plug-and-play operation, an offline cloning function and comes with a USB‑A to USB‑C cable. Power is supplied via a 12 V / 3 A input.

Advantages

The aluminium construction provides durability and passive heat dissipation while LED indicators allow quick status checks. With support for UASP and TRIM the dock enables improved transfer efficiency and SSD maintenance. Plug-and-play operation and an included USB cable simplify setup, and the offline cloning function allows sector-by-sector copying between drives without a PC.

Suitable for

• Backing up or archiving data from 2.5" and 3.5" SATA drives
• Cloning drives for upgrades or replacements
• Data recovery and quick access to internal drives via USB‑C
• Testing or temporarily using spare SSDs/HDDs

Key specifications

• Drive bays: 2 (supports 2.5" and 3.5" SATA drives)
• Supported media: SATA SSD and HDD
• Maximum data transfer rate: 10 Gbit/s (USB‑C upstream)
• Enclosure material: Aluminium
• Features: UASP support, TRIM support, offline cloning
• Indicators: LED activity/status indicators
• Power input: 12 V, 3 A
• Dimensions (H×W×D): 61 × 128 × 113 mm
• Included cable: USB‑A to USB‑C

How to use

Insert compatible 2.5" or 3.5" SATA drives into the two bays, connect the docking station to a computer using the supplied USB‑A to USB‑C cable (or another compatible USB‑C upstream cable), and connect the external power adapter to the 12 V / 3 A input. The device operates in plug-and-play mode; the computer should detect installed drives automatically. For offline cloning, follow on-unit instructions or the user manual to start the clone process without connecting to a PC.

Recommendations

Use the docking station on a stable, flat surface with adequate ventilation. Ensure the power adapter matches the 12 V / 3 A requirement. For reliable SSD performance enable TRIM support in the host system when applicable and use a USB cable and host port that support 10 Gbit/s to achieve maximum transfer rates.