Durable 102102 Durable 102104 altura 0,5 mm

Self-adhesive floor tape designed for long-term indoor marking of parking spaces, safety zones, walkways and driveways. The tape is 50 mm wide, 30 m long and 0.5 mm thick, meeting slip resistance class R9 (DIN 51130). Available in colours similar to RAL 9003 Signal white, 3001 Signal red, 1003 Signal yellow, 6032 Signal green and 5005 Signal blue. Model references: Durable 102102 / Durable 102104, MPN 102104, EAN 4005546999807.

Advantages

The product provides durable, self-adhesive floor marking with clear colour options for visual separation and safety guidance. Its 0.5 mm thickness and R9 slip resistance rating ensure a balance between durability and anti-slip performance for indoor use. The 50 mm × 30 m roll size allows extended marking without frequent replacements.

Suitable for

• Marking parking spaces in indoor garages
• Defining safety zones and aisles in warehouses and factories
• Creating walkways and pedestrian routes
• Temporary or semi-permanent traffic lanes in service areas

Key specifications

• Type: Self-adhesive floor tape for indoor use
• Width × Length: 50 mm × 30 m
• Thickness: 0.5 mm
• Slip resistance: R9 (DIN 51130)
• Colours: similar to RAL 9003, 3001, 1003, 6032, 5005
• Brand / MPN / EAN: Durable / 102104 / 4005546999807

How to use

Ensure the floor surface is clean, dry and free of dust, grease and loose particles. Measure and mark the intended line, then cut the required length of tape from the roll. Peel off the backing progressively while pressing the tape firmly onto the floor to avoid air pockets. Use a roller or firm pressure to secure full adhesion and trim edges if necessary. Allow the adhesive to set before subjecting the area to heavy traffic.

Recommendations

For best results, apply the tape at room temperature on smooth, dry surfaces and press with a roller to improve adhesion. Avoid exterior exposure and prolonged contact with solvents or oil to maintain longevity and slip resistance.