Elevador IWH ventosa 2 cabezas, capacidad de carga 80–100 kg

IWH Saugheber 2 Heads, load capacity 80–100 kg is a manual lifting device designed for secure handling of flat, smooth materials. The tool features two suction heads that create vacuum grip points to lift and position items such as glass panes, ceramic tiles and sheet materials. The two-head configuration provides improved stability and more even load distribution compared with a single-head lifter, supporting safer manual handling in workshop, construction and installation environments.

Advantages

The two suction heads increase contact area and reduce the risk of slippage on smooth surfaces, while the vacuum-based clamping avoids the need for mechanical clamps that can damage finishes. The device is compact and intended for handheld operation, allowing precise positioning and alignment of panels during installation. Its load capacity range of 80–100 kg makes it suitable for a variety of medium-weight lifting tasks without requiring powered equipment.

Suitable for

Key specifications

How to use

Before use, check that both suction pads are clean and free of debris. Place the suction heads on the flat surface to be lifted and activate the vacuum according to the device's operating method to establish firm contact. Lift using a steady, controlled motion and keep the load close to the body to maintain balance. For positioning, lower the item slowly and release the vacuum only when the panel is properly supported. Inspect suction pads regularly for wear and replace them if damaged.

Recommendations

Use the IWH Saugheber 2 Heads only on suitable flat, non-porous surfaces and within the specified load capacity. Avoid use on rough, dusty, wet or porous surfaces that prevent an airtight seal. When lifting near edges or corners, ensure balanced placement of the suction heads to prevent tipping. For heavy or awkward loads, use mechanical lifting equipment or a second operator to reduce strain and enhance safety.