Emisor y receptor AV TECHLY IDATA EXT-E70 — extensión HDMI por cable Cat6/6a/7, Full HD 1920x1080, 60 m, 10,2 Gbit/s, HDCP, negro

The Techly IDATA EXT-E70 AV transmitter & receiver extends HDMI signals over Cat6, Cat6A or Cat7 cable to allow HDMI video transmission up to 60 metres at resolutions up to 1920 x 1080. The compact black units include one HDMI input and one HDMI output, consume low power and are designed for simple installation without configuration, providing a reliable link between sources such as DVD and Blu-ray players, set-top boxes and satellite receivers and remote displays.

Advantages

The extender supports video bandwidth up to 10.2 Gbps and is HDCP 1.3 compliant to ensure protected high-definition content transmission. Using Cat6/6A/7 cabling enables longer runs while preserving a clear signal from the source. The devices are easy to install and do not require additional configuration, making them suitable for quick deployment in AV systems.

Suitable for

• Extending HDMI from DVD/Blu-ray players to remote displays
• Connecting set-top boxes or satellite receivers to distant TVs
• Placing monitors or projectors where cabling distances exceed HDMI cable limits

Key specifications

• Type: AV transmitter & receiver
• Maximum resolution: 1920 x 1080
• Maximum transfer distance: 60 m (over Cat6/6A/7)
• Video bandwidth: up to 10.2 Gbps
• HDMI in: 1; HDMI out: 1
• RJ-45 input ports: 1
• Power consumption: 5 W (transmitter) + 5 W (receiver)
• Colour: Black
• Weight: 0.343 kg

How to use

Connect the HDMI source (DVD/Blu-ray player, set-top box or satellite receiver) to the transmitter HDMI input, connect the transmitter and receiver with Cat6, Cat6A or Cat7 cable up to 60 m, and connect the receiver HDMI output to the display. Power both units and verify the display shows the source signal. No software configuration is required; the units negotiate the signal automatically and preserve HDCP 1.3 protected content.

Recommendations

For best results, use quality shielded Cat6/6A/7 cable and avoid running the cable parallel to high-voltage power lines. Verify both source and display support 1080p to ensure full compatibility with the extender's maximum resolution.