Equip 112183 Cable de alimentación negro 10 m CEE7/7 CEE7/3

Power cable EQUIP 112183 is a 10 m mains lead with a Schuko (CEE 7/7) plug and a CEE 7/3 female connector, constructed with H05VV-F3G 3x1.5 mm² cable and rated for 250 V and 16 A. The cable is intended for reliable power delivery to household and office devices such as desktop PCs, monitors, printers and other equipment that use European mains connectors. The flexible PVC jacket and three-core design allow convenient routing over longer distances while maintaining safe operation.

Advantages

The cable uses heavy-duty copper conductors for good conductivity and low power loss, and both plug and socket are precisely molded to ensure a secure connection and reduced risk of accidental disconnection. It is certified to multiple safety standards (VDE/CEBEC/DEMKO/IMQ/KEMA and others) and complies with RoHS and REACH, which supports safe, long-term use in professional and domestic environments.

Suitable for

• Desktop computers and workstations
• Monitors and printers
• Home appliances with CEE 7/3 inlet
• Office equipment and POS terminals
• Temporary power routing in workshops or events

Key specifications

• Connector A: CEE 7/7 (Schuko) straight male
• Connector B: CEE 7/3 straight female
• Cable type: H05VV-F3G, 3 x 1.5 mm²
• Length: 10 m
• Rated voltage/current: 250 V, 16 A (3500 W)
• Color: Black
• Approvals: VDE, CEBEC, DEMKO, FI, IMQ, KEMA, NF, NEMKO, OVE, SEMKO, GS
• Compliance: RoHS & REACH

How to use

Connect the CEE 7/7 (Schuko) plug to a properly grounded European mains outlet and insert the CEE 7/3 female connector into the device’s inlet. Ensure the power is switched off on the connected device before plugging or unplugging. Route the cable to avoid sharp bends, kinks and traffic areas to reduce wear. For permanent installations consult a qualified electrician to confirm suitability.

Recommendations

Use this power cable only within its rated limits (250 V / 16 A). Avoid exposure to liquids, extreme temperatures and mechanical damage. Do not modify the cable or connectors. Replace the cable if the jacket or conductors are damaged. For devices requiring higher currents or special grounding, choose an appropriate rated cable.