Estación de carga de suelo Blaupunkt P1PM2T2 negra de plástico 3700W cable de 8m

Single phased portable charger for electric cars with Type 2 plug that allows charging from any standard 230V outlet. The charger supports adjustable current between 8 and 16 A, enabling up to 3.7 kW charging power. It includes an integrated RCD sensor with 6 mA DC Type B protection, an IP54-rated housing for dust and water resistance, an 8 m total cable length, and a protective carry case for transport and storage.

Advantages

The portable Type 2 charger provides flexible charging from common 230V sockets and fits all electric cars with Type 2 connectors. Adjustable amperage (8–16 A) ensures compatibility with varying socket capabilities. Built-in RCD (6 mA DC, Type B) increases electrical safety, while the IP54 enclosure protects the device from dust and splashes. The 8 m length and included carry bag improve convenience during use and transport.

Key specifications

• Supply voltage: 230 V (single phase)
• Adjustable current: 8–16 A
• Maximum charging power: up to 3.7 kW
• Connector type: Type 2
• RCD protection: 6 mA DC – Type B
• Ingress protection: IP54
• Cable length: 8 m (total)
• Mode: Mode 2 (portable charger)
• Includes: protective carry case

How to use

Connect the charger to a 230 V socket, set the desired current between 8 and 16 A according to the socket and vehicle capability, then plug the Type 2 connector into the vehicle inlet. The built-in RCD monitors for fault current; follow vehicle and local electrical safety instructions during charging. After use, disconnect the charger from the vehicle and the socket and store it in the included carry case.

Recommendations

Use only properly grounded 230 V outlets and avoid using adapters or extension cords that are not rated for the charger’s current. Regularly inspect the cable and connectors for damage and keep the charger dry when possible despite its IP54 rating.