ESUN PLA+ 1,75mm rosa 1KG filamento para impresora 3D

ESUN PLA+ is a premium Polylactic Acid Plus filament designed for FDM 3D printers. This 1.75mm diameter filament in vibrant pink offers enhanced toughness and low shrinkage, making it ideal for high-quality prints with excellent surface finish. Each spool contains 1 kg of filament, providing ample material for various projects.

Advantages

PLA+ improves upon standard PLA with higher tensile strength (50-70 MPa) and better elongation at break (10-20%), resulting in more durable prints. The filament has a tight diameter tolerance of ±0.03 mm, ensuring consistent extrusion and reliable printing. It is also bubble-free, reducing the risk of print defects.

Suitable for

• FDM 3D printers with 1.75mm filament compatibility
• Prototyping, hobbyist projects, and decorative items
• Educational and maker environments

Key specifications

• Material: PLA+ (Polylactic Acid Plus)
• Filament Diameter: 1.75 mm
• Diameter Tolerance: ±0.03 mm
• Colour: Pink
• Net Weight: 1 kg
• Gross Weight: Approx. 1.25 kg
• Recommended Printing Temperature: 205-225 °C
• Recommended Bed Temperature: 45-60 °C
• Tensile Strength: 50-70 MPa
• Elongation at Break: 10-20 %
• Density: 1.24 g/cm³
• Melt Flow Index: 2.5-5 g/10min (190°C, 2.16kg)
• Spool Diameter: 200 mm
• Spool Width: 64 mm
• Spool Hub Hole Diameter: 56 mm
• Recommended Print Speed: 40-100 mm/s
• Shrinkage Rate: Low
• Compatibility: FDM 3D Printers

Recommendations

Store filament in a cool, dry place to maintain optimal printing quality. For best results, use a filament dryer if the material has absorbed moisture.