Filamento PLA-PLUS GEMBIRD, color metálico "oro", 1,75 mm, 1 kg

Gembird 3DP-PLA+1.75-02-GL Brown 1 kg is a brown Polylactic Acid (PLA) filament designed for fused filament fabrication (FFF/FDM) 3D printers. This 1 kg spool of PLA has a nominal diameter of 1.75 mm and is suitable for general-purpose printing tasks. The material offers good layer adhesion and reduced warping compared with lower-grade PLA, and it is RoHS certified to meet environmental safety requirements. The filament is compatible with any brand of 3D printer that accepts 1.75 mm PLA and is intended for use in producing detailed, dimensionally stable parts and models.

Advantages

The filament provides consistent extrusion due to its standardized 1.75 mm diameter and is formulated to deliver reliable layer bonding for improved part strength. Its brown color gives a natural, neutral appearance suitable for prototypes, models, and finished parts. RoHS certification indicates compliance with environmental safety limits for hazardous substances. The 1 kg spool offers sufficient material for multiple prints without frequent replacement.

Suitable for

• Prototyping and functional mock-ups
• Model making and miniatures
• Educational projects and training
• Household parts and decorative objects
• General-purpose 3D printing with 1.75 mm filament

Key specifications

• Material: Polylactic acid (PLA)
• Filament diameter: 1.75 mm
• Weight: 1 kg spool
• Colour: Brown
• Compatibility: Any brand of 3D printer accepting 1.75 mm PLA
• Certification: RoHS compliant

How to use

Load the filament onto a compatible 1.75 mm feed system following your printer manufacturer's instructions. Recommended print settings vary by printer and nozzle size; begin with typical PLA temperatures (usually between 190–220 °C) and adjust according to observed extrusion quality. Use a print bed surface appropriate for PLA, such as glass with adhesive or PEI, and consider a mildly heated bed if necessary. Allow printed parts to cool gradually on the build plate to preserve dimensional accuracy and reduce the risk of warping.

Recommendations

Store the filament in a dry environment and, if possible, in a sealed bag with desiccant to prevent moisture absorption that can affect print quality. Before printing detailed parts, run a short test print to fine-tune temperature and retraction settings for your specific printer.