ESYLUX PD-C360i/6 mini sensor infrarrojo pasivo (PIR) - con cable - 6 m - techo/pared - interior - blanco

The ESYLUX PD-C360i/6 mini is a compact passive infrared (PIR) sensor designed for automatic lighting control in indoor environments. With a 360° detection angle and a 6 m diameter range (at 2.5 m mounting height), it reliably detects movement in rooms such as offices, corridors, and stairwells. The sensor is wired and suitable for flush mounting on ceilings or walls.

Advantages

Energy-efficient operation with standby power consumption below 0.5 W. The integrated twilight switch allows adjustment of the light threshold from 10 to 2000 lux, enabling daylight-dependent control. The time setting can be adjusted from 10 seconds to 60 minutes. The relay output is potential-free, making it compatible with various loads including LED lighting (up to 300 W typical).

Suitable for

• Indoor lighting control in offices, meeting rooms, and hallways
• Automatic on/off switching based on occupancy
• Daylight-dependent dimming or switching in combination with compatible ballasts

Key specifications

• Sensor type: Passive Infrared (PIR)
• Detection angle: 360°
• Detection range (diameter): 6 m at 2.5 m mounting height
• Mounting type: Flush-mounted (ceiling/wall)
• Recommended mounting height: 2.0 - 3.0 m
• Protection class: IP20
• Operating voltage: 230 V AC, 50 Hz
• Switching capacity (incandescent): 2300 W
• Switching capacity (LED, typical): 300 W
• Time setting range: 10 sec - 60 min
• Light sensor range: 10 - 2000 Lux
• Colour: White
• Standby power consumption: < 0.5 W
• Operating temperature: 0°C to +50°C
• Output type: Relay (potential-free)
• Housing material: UV-stabilised polycarbonate
• Installation depth: 34 mm
• Cut-out diameter: 37 mm

Recommendations

For optimal performance, mount the sensor at a height of 2.5 m and ensure the detection area is free of obstructions. Suitable for use with LED, fluorescent, and incandescent loads. Always observe local electrical regulations during installation.