Extensión recta Barrow G1/4 de pulgada MF 7,5 mm — oro (TNYZ-G7.5 go)

Barrow G1/4" straight extension fitting MF 7.5 mm in gold is a compact metal adapter designed for custom liquid-cooling loops in PCs. The fitting provides a short, rigid extension between two G1/4" threaded components using a male-female (MF) connection, allowing precise alignment and a tidy tubing layout while preserving a standard thread interface for compatibility with radiators, pumps, reservoirs and water blocks.

Advantages

The metal construction ensures mechanical strength and reliable sealing when paired with appropriate washers or PTFE tape. The 7.5 mm extension length gives just enough offset to accommodate tight clearances without introducing excessive tubing stress. The gold finish offers corrosion-resistant plating and a consistent aesthetic that matches other metal fittings and visible loop components.

Suitable for

• Extending G1/4" threaded connections in PC water-cooling loops
• Creating neat, short offsets between radiator, pump, reservoir and water block
• Systems requiring a rigid metal spacer instead of flexible tubing

Key specifications

• Thread type: G1/4" male-female configuration
• Extension length: 7.5 mm
• Material: metal (plated finish)
• Finish color: gold
• Application: liquid cooling / PC custom loops

How to use

Screw the male end of the fitting into the receiving female G1/4" thread on one component and tighten by hand, then use a suitable wrench to achieve a secure fit without over-torquing. Insert the female end onto the male thread of the mating component and secure it in the same manner. Ensure any O-rings, gaskets or sealing tape required by your cooling components are correctly positioned before final tightening. After installation, pressure-test the loop and check for leaks before powering the system.

Recommendations

Use the fitting with compatible G1/4" components and appropriate sealing materials. Avoid excessive torque to prevent thread damage and verify that the 7.5 mm offset provides the clearance needed in your layout. Regularly inspect threaded joints for corrosion or loosening in long-term installations.