Filamento para impresora 3D Creality CR-Silk PLA 1,75 mm 1 kg – rosa lila

Creality CR-Silk PLA 1.75 mm is a silk-finish polylactic acid filament in a pink–purple shade, supplied on a 1 kg spool for FFF/FDM 3D printers. The material is formulated to provide a smooth extrusion and a satin sheen suitable for decorative parts, visual models and prototypes. With standard 1.75 mm diameter, the filament is compatible with most consumer and prosumer desktop printers that accept PLA materials and offers predictable flow and good layer adhesion for hobby and small-scale professional use.

Advantages

The silk PLA composition reduces visible layer lines and produces a subtle glossy finish without special post-processing. It is easy to print at typical PLA temperature ranges, exhibits low warping and reduced stringing compared with some standard PLA grades, and provides consistent diameter control for steady extrusion. The color and finish are chosen to enhance visual quality of display pieces and decorative elements.

Suitable for

• Decorative objects and display models
• Visual prototypes and concept models
• Cosmetic parts and enclosures with emphasis on appearance
• Hobbyist projects, figurines and ornaments
• Educational prints and demonstration models

Key specifications

• Material: Silk-finish polylactic acid (PLA)
• Diameter: 1.75 mm nominal
• Net weight: 1 kg spool
• Finish: Satin / silk sheen
• Color: Pink–purple
• Compatibility: FFF/FDM desktop 3D printers accepting PLA filament

How to use

Load the filament onto a printer spool holder and feed it into the extruder according to the printer manufacturer's instructions. Set printing temperatures within the standard PLA range (typically around 190–220 °C) and use a heated bed if available, set to a low temperature (around 40–60 °C) or use a build surface adhesive as recommended for PLA. Calibrate first-layer height and extrusion multiplier for optimal surface finish, and print cooling fans are generally recommended to improve detail and reduce stringing. Allow prints to cool before removing them to avoid deformation of fine features.

Recommendations

Store the filament in a dry environment away from direct sunlight and high humidity. For best results, dry the spool before printing if it has been exposed to moisture. Adjust retraction and cooling settings to minimize stringing and to achieve the desired satin appearance on visible surfaces.