Filamento para impresora 3D Polymaker Panchroma PLA Dual Silk Caribbean Sea 1,75 mm 1 kg CA03025

Polymaker Panchroma PLA Dual Silk in Caribbean Sea gives your prints a two-tone color shift with a silky, lustrous finish that sets it apart from standard PLA. The dual silk effect creates a dynamic, premium look without the need for post-processing. With a diameter tolerance of ±0.02 mm and a net weight of 1 kg, this filament delivers consistent extrusion and reliable performance across a wide range of FDM 3D printers.

Highlights

• Dual silk effect with two-tone color shift and silky finish
• Diameter: 1.75 mm with ±0.02 mm tolerance
• Net weight: 1 kg, vacuum-sealed with desiccant
• Low odor printing
• Compatible with all FDM 3D printers

In daily use

Print with a nozzle temperature of 190-220 °C and an optional bed temperature of 25-60 °C. Recommended print speed is 30-70 mm/s. The material has a density of 1.24 g/cm³, tensile strength of 50-60 MPa, elongation at break of 5-10%, and a heat deflection temperature of approximately 55 °C at 0.45 MPa.

Full specifications

• Material: PLA (Polylactic Acid)
• Filament type: Dual Silk Effect
• Diameter: 1.75 mm
• Diameter tolerance: ±0.02 mm
• Net weight: 1 kg
• Color: Caribbean Sea
• Series: Panchroma
• Recommended nozzle temperature: 190-220 °C
• Recommended bed temperature: 25-60 °C (optional)
• Recommended print speed: 30-70 mm/s
• Density: 1.24 g/cm³
• Tensile strength: 50-60 MPa
• Elongation at break: 5-10%
• Heat deflection temperature: ~55 °C at 0.45 MPa
• Packaging: Vacuum-sealed with desiccant
• Odor: Low odor

Final note

Polymaker Panchroma PLA Dual Silk Caribbean Sea is an excellent choice for decorative models, artistic pieces, and functional parts where a premium silky finish is desired.