Filamento PLA Flashforge 1,75 mm rosa 0,5 kg bobina

PLA Filament Flashforge 1.75 mm Pink 0.5 kg spool is a biodegradable polylactic acid (PLA) filament in pink color, supplied on a 0.5 kg spool and intended for use with FDM/FFF 3D printers that accept 1.75 mm filament. The material is suitable for prototyping, decorative models and general-purpose prints where low warping and minimal odor are preferred.

Advantages

This Flashforge PLA offers easy printability with low shrinkage and reduced risk of warping, enabling reliable layer adhesion and good surface finish. The filament emits minimal odor during printing and is compatible with a wide range of desktop FDM/FFF printers that use 1.75 mm filament. The pink color provides consistent pigmentation for decorative and presentation pieces.

Suitable for

• Rapid prototyping and concept models
• Decorative objects and visual prototypes
• Educational projects and classroom use
• Hobbyist prints and small-batch production

Key specifications

• Material: PLA (polylactic acid)
• Diameter: 1.75 mm
• Net weight: 0.5 kg spool
• Color: Pink
• Brand: Flashforge
• MPN: 90006424001
• EAN: 6971940405177

How to use

Load the 1.75 mm Flashforge PLA spool into your compatible FDM/FFF 3D printer following the printer manufacturer's filament loading procedure. Set an appropriate nozzle temperature (commonly 190–220 °C) and a bed temperature if required (typically 0–60 °C depending on adhesion method). Use print speeds, retraction and cooling settings suitable for PLA to achieve optimal surface quality. Store the spool in a dry place or sealed container with desiccant when not in use to maintain filament quality.

Recommendations

For best results, start with manufacturer-recommended print settings for PLA and adjust based on your printer and model geometry. Use a clean nozzle and calibrated extrusion multiplier to ensure dimensional accuracy. Avoid prolonged exposure to high humidity to prevent brittle or inconsistent extrusion.