Filtro de partículas 3M 6035 P3R pack de 2 — filtro de partículas de repuesto para mascarillas de protección respiratoria contra gases y vapores 3M

3M™ Bayonet Particulate Filters are CE approved and conveniently provide protection against a wide range of dusts, mists and other particulates depending on the model selected. Compatibility and approvals between filters and facepiece depends on regulations. Please refer to the Technical Datasheet to ensure filter and facepiece are approved.. They have a bayonet-style connection that fits any 3M™ Bayonet Reusable Respirator offering low breathing resistance and good balance with a slim, swept back profile, designed to optimise your field of vision when wearing the respirator.

Versatile and simple to install: 3M™ Bayonet Particulate Filters provide protection against a wide range of dusts, mists and other particles. 3M™ Particulate Filters 2000 Series provide low breathing resistance and good balance with a slim, swept back profile, designed to optimise your field of vision when wearing the respirator.They are flame resistant and easy to install. 3M™ Particulate Filters 6000 Series are encased in hard plastic cases to help protect them from damage, dirt, decontamination spray showers, debris, sparks and high temperatures. Simply choose the filter type that’s suitable for your individual needs and requirements, align the connection and twist to lock into place with a quarter turn. 3M™ Particulate Filters 2000 Series and 6000 Series are compatible with 3M™ Reusable Half Masks 6000 Series, 6500QL Series, 7500 Series* and 3M™ Reusable Full Face Masks 6000 Series, thus helping to reduce inventory needs. Help protect your workforce: 3M offers a free online tool to help you select the appropriate respirators and filters for your workplace respiratory hazards and contaminants and help determine filter change-out schedules. 3M Select and Service Life Software (www.3M.com/sls) contains more than 700 different chemicals and provides documentation of your choices. 3M™ Bayonet Particulate Filters are CE approved and are designed to help filter a broad range of airborne particulate contaminants when used with half and full face masks. Some models include nuisance level organic vapour and/or acid gas relief. Not for use in environments that are immediately dangerous to life or health (IDLH) or contain hazardous levels of gases and vapours (except hydrogen fluoride on certain models). Change 3M™ Bayonet Particulate Filters when they become dirty, damaged, or difficult to breathe through. Compatibility and approvals between filters and facepiece depends on regulations. Please refer to the Technical Datasheet to ensure filter and facepiece are approved.

3M 7000032083. Product colour: White, Compatibility: 3M Full Facepiece 6000 Series, 3M Half Facepiece 6000 Series, 3M Half Facepiece 6500QL Series, 3M.... Quantity per pack: 80 pc(s)

How to use

Before installation, inspect the respirator and filter housing for damage or contamination. Install each filter into the respirator following the respirator manufacturer’s attachment procedure until it is fully seated and sealed. Perform a user seal check and, if required, fit testing to verify correct installation and face seal. Replace filters when breathing resistance increases, when they become visibly soiled, or according to workplace exposure limits and the respirator manufacturer’s recommendations. Store spare filters in a clean, dry place away from contaminants and direct sunlight.

Recommendations

Use these filters only with compatible 3M gas and vapor respirator models and in accordance with applicable workplace health and safety regulations. Do not use particulate filters to protect against gases or vapors unless specified by the respirator system. Replace filters promptly when saturated or damaged and follow local guidelines for respirator maintenance, cleaning, and filter disposal.