Flash esclavo Godox TT350F negro 2,2 s tiempo de carga pila AA

Godox TT350F is a compact slave flash with a guide number of 36, designed for mirrorless and compact cameras. It is lightweight and portable, powered by AA batteries and offering a recycling time of approximately 2.2 seconds. The flash head has a broad tilt and swivel range, built-in Godox X radio system and supports high-speed sync up to 1/8000s. The set includes a diffuser, reflector, stand and protective cover, and firmware can be updated via the micro USB port.

Advantages

The TT350F combines a small size and low weight with a powerful GN36 output and a zoom range of 24–105mm (with a built-in wide-angle diffuser to ~15mm). Its head rotates 270° horizontally and tilts 97° vertically, enabling flexible bounce lighting. Integrated Godox X radio allows use as a Master controller or as a wireless Slave, and the unit supports TTL, manual (with S1/S2), and strobe (Multi) modes. High-speed sync (HSS) up to 1/8000s expands outdoor shooting possibilities, and firmware updates are available through the micro USB port.

Suitable for

• On-camera fill and bounce lighting for mirrorless and compact cameras
• Wireless multi-flash setups using the Godox X system
• Outdoor sessions requiring HSS to control ambient light
• Portraits, events and run-and-gun photography where portability matters

Key specifications

• Type: Slave flash (Godox TT350F)
• Guide number: 36
• Recycling time: approx. 2.2 s
• Power source: AA batteries
• Zoom range: 24–105 mm (built-in wide-angle diffuser ≈15 mm)
• Head movement: 270° horizontal / 97° vertical
• Wireless: Built-in Godox X radio (Master/Slave)
• Sync: HSS up to 1/8000 s
• Weight: approx. 0.21 kg
• Compatibility: Fujifilm camera systems
• Color: Black

How to use

Mount the flash on the camera hot shoe or use it off-camera controlled by a Godox X transmitter. Select the desired operation mode: TTL for automatic exposure, Manual for set power output (including S1/S2 for optical triggering) or Multi for stroboscopic effects. Tilt and swivel the head to bounce light from ceilings or walls; deploy the wide-angle diffuser when a wider field of illumination is required. Insert fresh AA batteries before use and connect the unit to a computer via the micro USB port to install firmware updates if needed.

Recommendations

For best results use fresh high-quality AA batteries to ensure the specified recycling time, bounce the flash off neutral-colored ceilings or walls to avoid color casts, and enable HSS when combining flash with fast shutter speeds in bright conditions.