FLASHFORGE PLA+ Filamento marrón 1,75 mm 1 kg

3D printing enthusiasts often struggle with filament that warps, clogs, or produces weak, brittle parts. The FLASHFORGE PLA+ 1.75mm Brown 1kg filament solves these issues with its enhanced durability and ease of use. Made from high-quality Polylactic Acid Plus, this filament offers improved strength and flexibility compared to standard PLA, while maintaining low warping and odor for a pleasant printing experience. Its rich brown color adds a natural, earthy tone to your creations, perfect for functional parts, prototypes, and artistic models.

Who is it for

This filament is ideal for hobbyists, educators, and professionals who need reliable, high-quality prints without the hassle of tuning. Whether you're printing household items, cosplay props, or mechanical parts, PLA+ delivers consistent results on any FDM printer with a heated bed.

Main features

• Enhanced PLA+ material for greater impact resistance and flexibility
• Precise 1.75mm diameter with ±0.03mm tolerance for smooth extrusion
• Rich brown color with a subtle sheen, ideal for wood-like or earthy prints
• Low warping and odor for comfortable indoor printing
• Tangle-free winding on a sturdy spool for worry-free feeding
• Biodegradable and eco-friendly, derived from renewable resources

Specifications

• Material: PLA+ (Polylactic Acid Plus)
• Filament Diameter: 1.75 mm
• Diameter Tolerance: ±0.03 mm
• Color: Brown
• Net Weight: 1 kg
• Recommended Printing Temperature: 205-225 °C
• Recommended Bed Temperature: 25-70 °C (typically 50-60 °C)
• Tensile Strength: 50-55 MPa
• Elongation at Break: 25-35 %
• Density: 1.24 g/cm³
• Melt Flow Index: 2.5 g/10min (190°C, 2.16kg)
• Spool Outer Diameter: 200 mm
• Spool Inner Hole Diameter: 56 mm
• Spool Width: 64 mm
• Compatibility: FDM 3D Printers
• Biodegradability: Yes
• Odor Level: Low
• Warping Tendency: Low
• Bubbles: No
• Tangle-Free: Yes

Tips

For best results, store the filament in a dry, sealed container with desiccant when not in use. Use a nozzle temperature of 210°C and a bed temperature of 55°C as a starting point, then adjust based on your printer. A heated bed is recommended to prevent warping, but not strictly required for small parts. Avoid printing in drafty areas to maintain consistent layer adhesion.