Filamento para impresora 3D Creality PLA Hyper Carbon Verde oscuro 1,75 mm 1 kg

Creality PLA Hyper Carbon Dark Green is a 1.75 mm diameter PLA filament supplied on a 1 kg spool for FDM/FFF 3D printers that accept 1.75 mm filament. This filament offers the typical characteristics of PLA—low warping, good layer adhesion and ease of printing—while providing a deep dark green color suitable for prototypes, decorative items and functional models. The material is biodegradable under industrial composting conditions and is intended for general-purpose printing where dimensional stability and surface appearance are important.

Advantages

The filament delivers consistent diameter and uniform extrusion to reduce nozzle clogs and layer inconsistencies. Its formulation enables smooth surface finish, accurate detail reproduction and reliable first-layer adhesion on common build surfaces. As a PLA variant, it requires no heated enclosure and prints at moderate temperatures, making it compatible with a wide range of consumer and prosumer FDM/FFF machines.

Suitable for

• Prototyping mechanical parts and form studies
• Decorative models, figurines and display elements
• Functional models and enclosures with moderate mechanical loads
• Educational projects and rapid iterative printing

Key specifications

• Material: Polylactic Acid (PLA)
• Diameter: 1.75 mm
• Spool weight: 1 kg net filament
• Color: Dark green
• Typical print temperature range: follow manufacturer PLA settings (approx. 190–220 °C depending on printer)
• Layer adhesion: good under recommended settings
• Recommended nozzle size: compatible with standard 0.4 mm nozzles

How to use

Load the 1.75 mm Creality PLA Hyper Carbon filament into a compatible FDM/FFF printer according to the printer manufacturer’s filament loading procedure. Set the hotend temperature within the typical PLA range (start around 200 °C and adjust by ±10 °C to optimise flow and surface finish for your machine). Use a heated bed if available (50–60 °C) or apply a suitable adhesion aid on an unheated bed. Print at moderate speeds and tune retraction settings to minimise stringing. Allow printed parts to cool gradually to reduce minor warping and improve dimensional accuracy.

Recommendations

Store the filament in a dry environment or sealed container with desiccant to preserve print quality. Adjust print temperature and cooling for best surface finish; increasing part cooling can improve detail while reducing cooling may help layer bonding for structural parts. Test small calibration prints when changing brands or colours to find the optimal settings for your specific printer and nozzle.