GETFORT GF-106D-4P-65 switch Fast Ethernet PoE+ de 6 puertos con 4 puertos PoE y 2 puertos uplink, presupuesto 65W, sobremesa metálico

In a small office or retail shop, powering IP cameras and VoIP phones often means running separate power lines. The GETFORT GF-106D-4P-65 eliminates that hassle by delivering both data and power over a single Ethernet cable. This compact metal switch provides four 10/100 Mbps PoE+ ports with a total power budget of 65W, plus two additional uplink ports for connecting to your router or NVR. Just plug in your PoE devices, connect the uplinks, and the network is ready—no extra power injectors needed.

Key specifications

• 6 total ports: 4× 10/100 Mbps PoE+ (IEEE 802.3af/at) + 2× 10/100 Mbps uplink
• Total PoE power budget: 65W, up to 30W per port
• Switching capacity: 1.2 Gbps, packet forwarding rate: 0.89 Mpps
• MAC address table: 2K entries, store-and-forward transmission
• Flow control: IEEE 802.3x full-duplex, backpressure half-duplex
• LED indicators: Power, Link/Act, PoE status
• Internal AC power supply: 100-240V, 50/60Hz
• Desktop metal housing, operating temperature 0°C to 40°C

Why choose it

This switch is built for reliable everyday performance in small networks. The metal enclosure dissipates heat efficiently and withstands the bumps of a busy workspace. PoE+ support means you can connect devices that need up to 30W, such as PTZ cameras or high-power access points. With plug-and-play operation and no software to configure, setup takes minutes. The 65W budget is enough for four typical PoE devices, and the two uplink ports keep your backbone traffic flowing smoothly.

Ideal use cases

• Small office networks connecting IP phones, cameras, and access points
• Retail shops needing surveillance and Wi-Fi without extra power outlets
• Home labs or compact workgroups requiring simple PoE expansion

Good to know

The switch operates silently without a fan, making it suitable for noise-sensitive environments. It supports auto-negotiation on all ports and complies with IEEE 802.3, 802.3u, 802.3x, 802.3af, and 802.3at standards. The internal power supply accepts 100-240V AC, so it can be used worldwide with the appropriate power cord.