Godox DP1000III unidad de flash de estudio 1000 Ws 1/800 s negro

The Godox DP1000III is an advanced 600Ws monolight designed for studio photography. It offers stable color temperature around 5600K, fast recycling to full power in approximately 1.0 second, and short flash durations selectable from 1/800 to 1/2000 s. The head includes a built-in 2.4 GHz System X receiver and uses a Bowens mount for compatibility with a wide range of light modifiers. The unit supports modeling light control and stores settings after restart. In the box: Godox DP1000III flash, power cable, flash tube cover, and modeling light bulb.

Advantages

The DP1000III provides variable power from 1/64 to full with 61 discrete power levels for precise exposure control, a 150W modeling lamp that can be set proportionally or as a percentage of flash power, and reliable color stability during output. Built-in System X wireless supports 16 groups and 32 channels plus 99 wireless ID settings to reduce interference. The clear LCD makes parameter adjustments straightforward and the unit is compatible with common Bowens-mount modifiers.

Suitable for

• Wedding photography
• Fashion and editorial shoots
• Portrait photography
• Product and commercial photography

Key specifications

• Brand: Godox
• Model: DP1000III
• Guide value: 600Ws monolight
• Color temperature: 5600K
• Power range: 1/64 to 1/1 (61 steps)
• Flash duration: 1/800 to 1/2000 s
• Recycle time to full power: ~1.0 s
• Modeling lamp: 150W (adjustable proportional or percentage)
• Wireless: Built-in 2.4 GHz System X (16 groups, 32 channels, 99 wireless IDs)
• Mount: Bowens

How to use

Mount the flash head on a light stand and attach any Bowens-compatible modifier required for your shoot. Connect the power cable and switch on the unit. Use the LCD controls to set the desired power level, modeling lamp mode, group/channel and wireless ID if using System X. Position the light and take test shots, then fine-tune power or modifier placement to achieve the required exposure and look. After adjustments, the flash will retain settings after restart.

Recommendations

For consistent color and exposure, allow the flash to reach full recycle between full-power shots and set the modeling lamp either proportionally or by percentage to preview final results accurately; use the wireless ID feature to avoid interference when working near other wireless systems.