GrizzGlass CarDisplay Protection Matte film for Toyota C-HR 8 (2019-2023)

• Grizz CarDisplay Protection matte film
• Absorbs fingerprints
• Eliminates light reflection
• Perfectly fitted
• Perfectly protects against scratches
• Does not affect touch functionality

Matte film is a type of protective coating that reduces glare and light reflections on the screen, improving visibility and readability of information displayed on the screen in various lighting conditions.

• Reduction of fingerprints and smudges

Compared to a glossy surface, the matte surface reduces the visibility of greasy marks and dirt that can be left by fingers.

• 100% touch sensitivity

The film is covered with a coating that minimizes the amount of fingerprints and greasy smudges. Finger glide and touch sensitivity are like the device's screen.

• Reliability

Thanks to its flexibility, Grizz CarDisplay Protection does not crack or crumble, and at the same time perfectly adheres to the screen. Comfort of use remains unchanged - at the highest level.

• Perfect fit

Using laser technology, the film is perfectly cut to the screen of your device. Perfectly fitted to the screen and almost invisible. Forget about air bubbles on the edges.

• Installation instructions

1. Clean the screen thoroughly. Peel off the middle protective layer with the START sticker.

2. Try the film, fit it perfectly on each side and run your finger through the middle of the film.

3. Pressing part of the film with your hand, peel off the next part of the START layer from the bottom.

4. Pressing the other part of the film with your hand, peel off the remaining part of the START layer from the bottom.

5. Remove the FINISH layer by pulling the sticker. Guide the protective film parallel to the screen. Push out the remaining air using a squeegee. To remove any dust from under the film, use DUSTSTIX.

• Any air marks will be absorbed within 48 hours.
• 1x Grizz CarDisplay Protection matte film
• 1x squeegee
• 2x dry cloth
• 4x DustStix
• 1x original packaging