Hama 00200625 cable USB USB 3.2 Gen 1 (3.1 Gen 1) 1.5 m USB A USB B negro

The Hama 00200625 USB cable is a 1.5 m black data cable with USB A to USB B connectors that supports USB 3.2 Gen 1 (also marketed as USB 3.1 Gen 1) for high-speed connections. Designed for data transfer between computers and peripheral devices, this cable provides a nominal maximum data rate of 5 Gbit/s and a straightforward, reversible installation orientation for the respective connector types. Its slim black jacket suits desktop and office environments while keeping cable runs tidy.

Advantages

This USB A to USB B cable supports USB 3.2 Gen 1 data rates up to 5 Gbit/s, enabling faster file transfers and improved responsiveness for connected devices that support the standard. The 1.5 m length offers a practical balance between reach and minimal clutter. The standardized USB A and USB B connectors ensure compatibility with a wide range of printers, scanners, audio interfaces, external drives, and other peripherals that use a USB B port. The black outer sheath provides a neutral appearance and resists visible soiling in everyday use.

Suitable for

Key specifications

How to use

Plug the USB A connector into an available USB port on your computer or host device and insert the USB B connector into the corresponding port on the peripheral device. Ensure both devices are powered on if required by the peripheral. After physical connection, the host operating system should detect the peripheral automatically; install any device drivers or software if prompted by the system. For optimal performance, connect both ends firmly and avoid sharp bends or kinks in the cable.

Recommendations

For consistent performance at USB 3.2 Gen 1 speeds, use the cable with devices and host ports that explicitly support USB 3.x standards. Keep the cable away from strong electromagnetic sources and avoid tightly coiling it during use. If you require longer runs or shielded installations in noisy environments, consider an alternative cable with additional shielding or a different length to suit your setup.