Servidor rack HP Enterprise ProLiant DL360 Gen12 6507P 8 núcleos 1P 2×32GB-R 8×SFF MR408i-o 2×480GB SSD 2×1000W PS (EU)

This HP Enterprise ProLiant DL360 Gen12 rack server (model 6507P) is a 1U, single-processor system configured for compact data centre and virtualization workloads. It ships with one 8‑core CPU, two 32 GB registered DDR memory modules (64 GB total), an MR408i-o hardware RAID controller, eight SFF front drive bays, two 480 GB SSDs for storage and redundant dual 1000W power supplies (EU). Designed for 24/7 operation, the server combines hardware RAID support, SFF storage capacity and redundant power to provide a space-efficient platform for compute and virtualised services.

Advantages

The DL360 Gen12 configuration provides a compact 1U footprint with hardware RAID via the MR408i-o controller and hot-swap SFF bays for flexible storage options. Redundant 1000W power supplies increase availability in rack deployments, while the included 480 GB SSDs deliver low-latency local storage suitable for operating systems or frequently accessed data. The 64 GB of registered memory supports virtualization and multi-threaded workloads within the limits of a single-socket configuration.

Suitable for

• Virtualisation hosts for small to medium VM densities
• Edge and rack-mounted compute in space-constrained environments
• Databases and applications requiring low-latency SSD storage
• Hardware-RAID protected workload and OS boot devices

Key specifications

• Form factor: 1U rack server
• Processor: single 8-core CPU (installed)
• Memory: 2 × 32 GB registered DDR modules (64 GB total)
• Storage bays: 8 × SFF front-accessible drive bays
• Included drives: 2 × 480 GB solid-state drives
• RAID controller: MR408i-o hardware RAID
• Power: 2 × 1000W redundant power supplies (EU specification)
• Management: onboard enterprise management (iLO generation per platform)

How to use

Install the DL360 Gen12 into a standard 19-inch rack using appropriate rails and secure according to rack-mount instructions. Connect redundant AC feed lines to both 1000W PSUs to ensure uninterrupted power. Configure the RAID arrays using the MR408i-o management interface before provisioning operating systems on the included 480 GB SSDs or additional SFF drives. Use the server management interface for firmware updates, health monitoring and remote console access to perform system configuration and ongoing maintenance.

Recommendations

Place the server in a properly cooled rack environment with sufficient airflow; follow vendor guidelines for front-to-rear cooling and leave required clearance. For higher availability, configure RAID levels appropriate to your workload and populate both power supplies on separate circuits. Use the included SSDs for OS or cache tiers and expand storage with additional SFF drives as needed.