InLine 16153 Cable de alimentación negro 3 m CEE7/16 IEC C7

Integrated switch for added convenience:The power cord has a practical on/off switch in the cable, allowing you to quickly disconnect it from the power supply.
Euro plug to C7 for versatile applications:Compatible with numerous AV devices, charging units, and other devices with a Euro 8 connection.
High safety thanks to 0.75 mm² cross-section:The wire cross-section ensures reliable power transmission within the specified power range.
Energy-efficient thanks to standby avoidance:The switch helps to avoid unnecessary power consumption, which is particularly advantageous in commercial applications.
Robust workmanship for indoor use:The black cable sheathing is inconspicuous and ensures stable and durable handling.

The InLine Euro power cable with switch is a well-designed solution for all applications in which devices with a Euro 8 connection need to be reliably supplied with power and completely disconnected from the mains when necessary. Thanks to the integrated on/off switch, the power flow can be conveniently controlled without pulling the plug out of the socket—this increases safety and reduces energy consumption in standby mode.
With a Euro plug (CEE 7/16, 2-pin) on the mains side and a C7 coupling connector (Euro 8, "Figure 8"), the cable can be used universally for many AV devices, power supplies, or chargers. The 0.75 mm² wire cross-section ensures a stable power supply with a maximum output of 625 W. The switch is positioned approximately 30 cm from the Euro plug (0.5 m from the center), offering additional flexibility in use.
The cable is designed for indoor use and is ideal for office workstations, service points, or sales areas where energy efficiency and ease of use are required.

Nominal voltage: 250 V AC
Nominal current: 2.5 A
Max. power: 625 W
Area of application: Indoor use
Color: Black

InLine 16153. Cable length: 3 m, Connector 1: CEE7/16, Connector 2: IEC C7, Cable type: H03VVH2-F. Input voltage: 250 V, Input current: 2.5 A

How to use

Connect the Euro plug to a compatible mains outlet and insert the C7 connector into the device inlet. Use the inline on/off switch to switch the connected device on or off without removing the plug from the socket. Ensure the cable and switch remain dry and well-ventilated and do not exceed the specified current and power ratings during use.

Recommendations

Use the cable only indoors and with devices that accept a C7 (Figure-8) connector. To avoid overheating, do not exceed 2.5 A / 625 W and do not use the cable where exposed to moisture or mechanical stress. Disconnect the cable by using the switch where possible to reduce standby consumption.