InLine Cable SATA 6Gb/s, conector pequeño, 0,5 m, con bloqueos 27705K

The InLine SATA 6Gb/s Cable small Plug 0.5m with latches (model 27705K) is a 0.5 meter internal SATA data cable with a reduced-width SATA plug and integrated safety latches. Its compact connector makes it suitable for installations in tighter PC cases while supporting data transfer rates up to 6 Gb/s. The cable is blue and intended for connecting SATA drives to motherboards or controllers for reliable internal data transmission.

Advantages

The smaller SATA plug allows easier routing and connection in cramped enclosures. Integrated safety latches secure the connection and help prevent accidental disconnection from drives. The 0.5 m length provides sufficient reach for most internal layouts without excess cable clutter, and the cable supports SATA data rates up to 6 Gb/s.

Suitable for

• Connecting 2.5" or 3.5" SATA hard drives and SSDs to a motherboard
• PC builds with limited internal space or compact cases
• System upgrades where a short internal SATA cable is required

Key specifications

• Interface: SATA
• Maximum data rate: 6 Gb/s
• Cable length: 0.5 m
• Connector type: reduced-width (small) SATA plug with latches
• Colour: Blue
• Brand / MPN: InLine / 27705K

How to use

Align the small SATA plug with the drive or motherboard SATA port and push gently until the latch clicks into place. To remove the cable, press the latch and pull the connector straight out to avoid damaging the port. Route the cable to minimise interference with fans and other components, and avoid sharp bends near connector ends.

Recommendations

For stable operation, use the cable inside the PC chassis only and avoid exposing it to excessive heat or mechanical stress. Verify that the reduced-width SATA connector matches the device port before installation.