Interruptor eléctrico 1P Busch-Jaeger 1413-0-0491 — 1 polo, 250 V AC, 10 A, azul metálico, 71×71×25 mm

Electrical switch 1P Busch-Jaeger 1413-0-0491 is a single-pole wall switch with a metallic blue finish designed for standard residential and light commercial use. The unit is rated for 250 V AC and a nominal current of 10 A, and its compact housing measures 71×71×25 mm, making it suitable for typical flush-mounted wall boxes and control circuits. Construction and certification meet CE and RoHS requirements to ensure electrical safety and material compliance.

Advantages

The switch provides a compact and robust solution for single-pole switching of lighting and other single-phase loads. Its metallic blue cover offers a durable surface that resists everyday wear while maintaining a consistent aesthetic in interior installations. The device’s electrical ratings (250 V AC, 10 A) and certified design allow straightforward integration into existing wiring systems without additional modifications.

Suitable for

Key specifications

How to use

Install the switch into a standard flush-mounted wall box following local electrical codes and safety practices. Ensure power is disconnected at the circuit breaker before beginning installation. Connect the line (live) conductor to the input terminal and the switched conductor to the output terminal; secure earth/ground and neutral conductors as required by the installation. After wiring and securing the switch into the box, attach the cover plate and restore power to verify correct operation.

Recommendations

Use this switch for indoor, dry-location installations and avoid exposure to moisture or corrosive atmospheres. Do not exceed the nominal current of 10 A and ensure connected loads are compatible with single-pole switching. Periodically inspect terminals for tightness and signs of wear, and replace the device if any damage or overheating is observed.