Interruptor WiFi en línea Tellur TLL331161 2200W — relé inteligente en línea para lámparas y dispositivos

Tellur TLL331161 is an inline WiFi switch designed to be installed inside a junction box or inline with electrical wiring to provide remote control of lamps and small household appliances up to 2200W. The device connects to a local WiFi network and enables on/off switching from a mobile app, allowing timed schedules and manual control without changing existing wall switches or wiring layout. Its compact form factor fits typical installation spaces and is intended for domestic and light-commercial electrical circuits.

Advantages

The inline WiFi switch offers remote access via a smartphone app over a standard WiFi connection, allowing users to control lighting and appliances from anywhere within network range. It supports timed operation and scheduling to automate daily routines and reduce standby energy consumption. The compact design makes it suitable for installation inside junction boxes or behind fittings without altering visible switches. The switch is rated for loads up to 2200W, which covers most lamps and many small household appliances, and it integrates with basic home automation setups.

Suitable for

• Remote on/off control of LED, incandescent, and halogen lamps within load limits
• Controlling small household appliances such as fans or heaters that do not exceed 2200W
• Automating lighting schedules in living rooms, bedrooms, kitchens, or corridors
• Integration into existing electrical junction boxes or inline wiring installations

Key specifications

• Maximum load capacity: 2200W
• Connectivity: WiFi (2.4 GHz)
• Control: remote on/off and scheduling via mobile application
• Form factor: compact inline relay designed for installation inside junction boxes or inline wiring
• Intended use: residential and light-commercial circuits for lamps and small appliances

How to use

Install the inline WiFi switch in series with the load inside a suitable junction box or inline wiring conduit, following local electrical regulations and turning off power before installation. Connect the live and neutral conductors according to the wiring diagram provided with the product, secure connections, and restore power. Use the manufacturer’s mobile application to connect the switch to a 2.4 GHz WiFi network, name the device, and configure schedules or manual controls. After setup, operate the connected lamp or appliance via the app, or retain existing wall switches for local control if desired.

Recommendations

Ensure the connected load does not exceed 2200W and verify compatibility with lamp types or appliance starting currents. For safety and compliance, installation should be performed by a qualified electrician and the device should be placed in a dry, ventilated junction box away from direct heat sources. Use the provided app for scheduling to optimize energy use and avoid continuous full-load operation where possible.