Interruptor WiFi inteligente Tellur SS1N — 1 puerto, 1800W, 10A

Tellur SS1N is a Smart WiFi switch with a single output port designed for controlling lights and small household appliances. Rated for 1800W and 10A, it connects to a home WiFi network to allow remote switching, scheduling and basic energy management via a companion app or compatible voice assistants. The compact unit is intended for installation in a wall box or behind fixtures to automate one electrical circuit without additional hubs.

Advantages

The switch supports remote on/off control and timed schedules through a mobile app, enabling automation of lighting and single appliances. Its WiFi connectivity removes the need for a separate hub, while the single-port design keeps installation straightforward. With its 10A current rating and 1800W power capacity, the device is suitable for typical lighting loads and many small appliances, and it offers integration with common smart home ecosystems for voice control and scene creation.

Suitable for

• Automating indoor lighting circuits (LED, CFL, incandescent within load limits)
• Controlling small appliances such as fans, coffee makers or bedside lamps
• Scheduling lights for energy saving and presence simulation
• Integrating a single circuit into a voice-controlled smart home setup

Key specifications

• Number of output ports: 1
• Maximum power: 1800 W
• Maximum current: 10 A
• Connectivity: WiFi (works with standard home wireless networks)
• Control methods: mobile app and compatible voice assistants
• Installation: in-wall or behind fixture for single-circuit control

How to use

Install the Tellur SS1N in place of or behind an existing wall switch following local electrical regulations and after disconnecting power. Connect the live and neutral conductors and the load according to the product wiring diagram supplied with the unit. Set up the device using the Tellur mobile app by connecting it to the home WiFi network, create schedules or scenes, and optionally link it to a voice assistant for hands-free control. Verify load ratings and ensure connected fixtures or appliances do not exceed 10 A or 1800 W combined.

Recommendations

Use the switch for lighting and small appliances only; avoid connecting inductive or high-current loads such as motors, heaters or air conditioners that exceed the specified current or power limits. Ensure professional installation if unsure about household wiring, and keep firmware and app software up to date to maintain connectivity and security.