Jabra PanaCast 50 cable USB – USB 3.0, 2 m

The Jabra PanaCast 50 2m USB cable provides a direct, high-speed connection between a Jabra PanaCast 50 device and a host computer. It features a USB-A connector on one end and a USB-C connector on the other, supports USB 3.2 Gen 1 data transfer rates, and comes in a 2-metre black cable designed for reliable, everyday use.

Advantages

The cable supports USB 3.2 Gen 1 (also listed as 3.1 Gen 1) for fast data transfer, ensuring the PanaCast 50 can operate at maximum available bandwidth. Its 2 m length offers flexible placement of the camera relative to the host, and the durable black jacket resists wear during frequent use. The one-to-one USB-A to USB-C configuration ensures compatibility with a wide range of desktop and laptop USB-A ports while connecting to a USB-C-equipped PanaCast 50.

Suitable for

• Connecting Jabra PanaCast 50 to desktop or laptop computers with USB-A ports
• Video conferencing and streaming where maximum bandwidth is needed
• Meeting rooms and flexible camera placement up to 2 m from the host

Key specifications

• Connector 1: USB A
• Connector 2: USB C
• USB version: USB 3.2 Gen 1 (3.1 Gen 1)
• Cable length: 2 m
• Colour: Black
• Weight: 0.077 kg

How to use

Plug the USB-C end into the Jabra PanaCast 50 and the USB-A end into the computer’s USB-A port. Ensure both connectors are fully seated. For best performance, use a USB 3.x port on the computer and confirm the host system recognizes the PanaCast 50. Position the camera within the 2 m reach of the cable and secure the cable to avoid stress on the connectors.

Recommendations

To ensure the PanaCast 50 runs at maximum available bandwidth, connect this 2 m USB 3.0/3.2 Gen 1 cable between the device and a USB 3.x (USB-A) port on your computer. Avoid using unpowered USB hubs or extension cables that may reduce bandwidth or power delivery.