Barthelme 51542727 Tira LED con conexión soldada 24V DC 5m blanco cálido 2700K 5000lm IP20

LED strip light from Barthelme's LEDlight flex series, delivering 5000 lumens of warm white illumination across a 5-meter length. The strip operates on 24V DC and features a solder connection for secure electrical integration.

Advantages

High luminous flux of 1000 lm/m ensures bright, even lighting. The strip is cuttable every 50 mm, allowing precise length adjustment. Self-adhesive 3M tape on the back simplifies mounting on clean, flat surfaces. With a CRI >80, colours appear natural and vibrant. The strip is dimmable with a suitable controller, offering flexible brightness control.

Suitable for

• Accent lighting in residential and commercial spaces
• Cove lighting and indirect illumination
• Under-cabinet lighting in kitchens
• Display and shelf lighting
• Architectural lighting details

Key specifications

• Operating voltage: 24 V/DC
• Light colour: Warm white (2700 K)
• Luminous flux: 5000 lm total (1000 lm/m)
• Power consumption: 48 W total (9.6 W/m)
• LED type: SMD 2835, 120 LEDs per meter
• Beam angle: 120°
• Colour rendering index (CRI): >80
• Dimmable: Yes (with suitable controller)
• Cuttable: Every 50 mm
• Connection type: Solder connection
• IP rating: IP20 (indoor use only)
• Self-adhesive: Yes (3M adhesive tape)
• Lifetime: 50,000 hours

Recommendations

For best adhesion, ensure the mounting surface is clean, dry, and free of dust or grease. Use a compatible 24V DC LED driver and, if dimming is required, a suitable PWM or constant voltage dimmer. Avoid bending the strip sharply at the cut points to prevent damage to the solder pads.