Haz una pregunta sobre este producto
Envíos y devoluciones
-90x90h.webp "Configura tu PC gaming — Ryzen 7 7700 + RTX 5070, 32GB DDR5 | DistriNode")
Solar lamp FF6-B
Superfire FF6-B solar lamp will illuminate any corner. It guarantees stable illumination with a brightness of 220 lm and detects movement even at an angle of 120° . It offers 3 lighting modes and automatically activates at night. It has a built-in solar panel that intelligently charges the lamp through the day. Its operating time reaches 12 hours, and thanks to the use of durable materials, it is suitable for various weather conditions.
Customize the operation to suit your needs
The FF6-B lamp features a precision motion sensor that automatically activates the lamp after dark when it detects motion. You can also choose from 3 lighting modes. In the first, the lamp turns on when you appear near it and completely turns off 20 seconds after you disappear from the sensor's range. In the second mode, the lamp turns on when you move and gently extinguishes the light for 20 seconds. The last mode allows you to set continuous illumination with low intensity.
Up to 12 hours of operation
Bet on green energy. The lamp has a small solar panel that uses solar energy to power it. The product automatically charges its battery during the day, and provides up to 12 hours of illumination after dark - all thanks to a durable 1200 mAh battery.
Extremely durable and resistant
High-quality materials were used to make the lamp, which are characterized by above-average durability, as well as resistance to changing weather conditions. So you do not have to worry about its damage during heavy rain or snowfall. Model FF6-B provides optimal lighting with a brightness of 200 lm. It will be perfect on the terrace, balcony or in front of the house.
| Manufacturer | Superfire |
|---|---|
| Model | FF6-B |
| Power | 33 W (0.2W x 166 pcs) |
| Brightness level | 200 lm |
| Battery capacity | 1200 mAh |
| Operating time | 8-12 hours |
| Tilt angle | 120° |
| Range | 3~5 m |
| Material | ABS |
| Dimensions | 150 x 115 x 50 mm |
How to use
Mount the lamp in a location with good daytime sunlight exposure for the solar panel. Select the desired lighting mode using the lamp controls: motion-activated full brightness, motion-activated with delayed off, or continuous low-level illumination. After installation, the lamp charges automatically during daylight; at night it will operate according to the selected mode. For accurate motion detection, position the lamp so the sensor faces the area to be monitored within the 3–5 m range and 120° angle.
Recommendations
For reliable performance, periodically clean the solar panel from dust and debris and avoid mounting in permanently shaded locations. In winter, clear snow accumulation from the panel to maintain charging efficiency. If the lamp is not used for extended periods, store it in a dry place to protect the ABS housing and battery life.