Láser de líneas DeWALT DCE089D1G-QW

The DeWALT DCE089D1G-QW line level provides precise horizontal and vertical reference lines for layout and alignment tasks. With a maximum working range of 30 m and a levelling accuracy of ±3 mm/m, the unit supports accurate measurements on construction sites and interior fit-outs. The device self-levels within ±4° and includes a mint-coloured housing and standard tripod threads (1/4" and 5/8") for secure mounting. It is powered by a 10.8 V rechargeable battery, enabling cordless operation and portability.

Advantages

The DeWALT DCE089D1G-QW offers quick self-levelling and clear line projection to reduce manual layout time. Its accuracy specification of ±3 mm/m and a 30 m range deliver consistent results over common indoor and near-range outdoor distances. Dual tripod thread options expand mounting compatibility, while the compact cordless design improves mobility between workstations. The mint-colour housing improves visibility on site.

Suitable for

• Interior finishing and plasterboard alignment
• Tiling and cabinetry layout
• Electrical and lighting fixture positioning
• Short-range exterior leveling and site layout within 30 m

Key specifications

• Maximum range: 30 m
• Levelling accuracy: ±3 mm/m
• Self-levelling range: ±4°
• Power: 10.8 V rechargeable battery
• Tripod mounting threads: 1/4" and 5/8"
• Laser line colour: mint (housing colour)

How to use

Place the DeWALT line level on a flat surface or mount it on a tripod using either the 1/4" or 5/8" thread. Switch on the unit and allow it to self-level; if the tilt exceeds ±4°, adjust the device position until levelling completes. Project horizontal or vertical lines as required for your layout, verify alignment at multiple points within the 30 m working range, and recharge the 10.8 V battery as needed to maintain operation.

Recommendations

For best results, use the tool on stable supports and verify calibration periodically. When working near the limits of the self-levelling range, use a tripod to reduce manual re-adjustment. Avoid direct exposure of the laser line to reflective surfaces and store the device in a protective case to preserve accuracy and longevity.