Lijadora de suelo EINHELL TP‑RS 18/32 Li BL Solo — 24.000 rpm, negro/rojo, 1,11 kg

The EINHELL TP‑RS 18/32 Li BL Solo is a compact cordless random orbital floor sander designed for precise sanding and finishing of wooden floors, worktops and other wooden surfaces. Powered by a brushless PurePOWER motor with electronic speed control, the tool delivers up to 24,000 RPM and combines a 125 mm sanding pad with a 3.2 mm orbit for smooth material removal and an even surface finish. Supplied as a solo unit without battery and charger, this lightweight sander (1.11 kg) features a low‑profile housing, Softgrip surfaces and a removable auxiliary handle for comfortable handling and close control at the workpiece.

Advantages

The brushless motor provides higher efficiency, longer runtime and reduced maintenance compared with traditional brushed motors; after online registration the motor is covered by a 10‑year warranty. Speed control electronics allow the sanding speed to be adjusted to different materials and applications, while the eccentric oscillation ensures uniform sanding and high removal rates. Dust is collected internally by a dust trap and pleated filter, and an extraction port enables connection to an external vacuum for cleaner operation. Abrasive sheets attach securely with a micro hook‑and‑loop system and are quick to change. The compact, lightweight design and ergonomic Softgrip surfaces support precise edge work and extended use.

Suitable for

• Sanding and finishing wooden floors and floorboards
• Edge sanding and detailed work on furniture and stair treads
• Removing old lacquers, paints or surface blemishes before refinishing
• Small renovation and workshop sanding tasks where mobility is needed

Key specifications

• Motor type: brushless PurePOWER motor
• No‑load speed: up to 24,000 RPM
• Sanding pad diameter: 125 mm
• Orbit diameter: 3.2 mm
• Weight: 1.11 kg
• Attachment system: micro hook‑and‑loop for abrasive sheets
• Dust management: internal dust extraction with dust trap and pleated filter; 35 mm extraction port for external connection
• Ergonomics: low‑profile body, Softgrip surfaces, removable auxiliary handle
• Power system: cordless, compatible with 18 V Power X‑Change batteries (battery and charger not included)
• Supply: includes three abrasive sheets (P60, P80, P120)

How to use

Fit a suitable 125 mm abrasive sheet to the sanding pad using the micro hook‑and‑loop fastener and secure the removable auxiliary handle if additional control is required. Insert a charged compatible 18 V battery from the Power X‑Change family (sold separately). Select an appropriate speed setting for the material using the electronic speed control. Switch the sander on and move it evenly across the work surface with light, consistent pressure, keeping the tool flat to avoid gouging. Use the internal dust collector for small jobs or connect a 35 mm vacuum hose to the extraction port for continuous dust removal during larger tasks. Turn the tool off and wait until it stops completely before changing abrasives or storing the sander.

Recommendations

For best results start with a coarser grit (for example P60) to remove old finishes or level the surface, then progress to finer grits (P80, P120) for smoothing and preparing for finishing. Use steady, overlapping passes and avoid applying excessive pressure; let the sander’s orbital action and speed do the work. When working near edges or profiles, use the auxiliary handle and a slower speed to maintain control. Regularly empty the dust trap and clean or replace the pleated filter to maintain suction performance.