Limpiador a vapor Kärcher SC 4 Deluxe — capacidad del depósito 1,3 L, 2200 W, 4 bar de presión de vapor

The Kärcher SC 4 Deluxe cylinder steam cleaner delivers powerful cleaning at 4.0 bar and eliminates up to 99.999% of viruses* and 99.99% of common household bacteria** on hard surfaces. The unit has a 1.3 L removable, permanently refillable water tank and a 2200 W heater that reaches operating temperature in about 3 minutes. An extra-large integrated accessory compartment stores accessories, cable and hose directly on the device for compact storage.

Advantages

The SC 4 Deluxe offers stepless three-step steam regulation to adapt steam flow to the surface and level of soiling. The EasyFix floor nozzle with flexible joint and lamella technology plus a hook-and-loop system for the cleaning cloth ensure ergonomic, effective floor cleaning. An illuminated LED strip indicates operating mode, and dedicated accessories allow targeted removal of stubborn dirt on tiles, hobs, exhaust hoods and in crevices and joints. The 5 m power cable increases reach during use.

Suitable for

• Hard floors and sealed surfaces (tiles, sealed stone, laminate)
• Kitchen surfaces including hobs and range hoods
• Bathroom surfaces and grout lines
• Small crevices, joints and other hard-to-reach spots

Key specifications

• Model: Kärcher SC 4 Deluxe (1.513-460.0)
• Power: 2200 W
• Water tank capacity: 1.3 L (removable, refillable)
• Steam pressure: 4.0 bar
• Heat-up time: approx. 3 minutes
• Power cable length: 5 m

How to use

Fill the removable 1.3 L tank with water and secure it on the device. Switch on the steam cleaner and wait the indicated heat-up time (about 3 minutes) until the LED strip shows the operating mode. Select the appropriate steam level using the stepless three-step regulation according to the surface and dirt. Attach the required accessory—for floors use the EasyFix nozzle with the hook-and-loop cloth; for tight spots use the small brushes and nozzles. Move the nozzle slowly over the surface while applying steam; allow treated surfaces to dry or wipe with a cloth if necessary.

Recommendations

Do not use on unsealed wooden floors, polished or heat-sensitive surfaces. Always test on an inconspicuous area before full treatment. Use only water in the tank and follow the manufacturer’s maintenance instructions to ensure safe and reliable operation.