Lindy 1,5 m cable USB a DC 0,7 mm interior / 2,5 mm exterior

The Lindy USB Power Cable (1.5 m) supplies 5V DC power from a standard USB A port to devices with an EIAJ-01 barrel connector (2.5 mm outer, 0.7 mm inner). With a maximum current of 0.9 A at 5 V, the cable is suited for mobile and compact power needs and removes the need to carry a separate power supply when travelling.

Advantages

This 1.5 m USB to DC cable features a USB A plug and an EIAJ-01 (2.5 mm outer, 0.7 mm inner) barrel connector, providing a simple, single-cable solution for powering compatible 5 V devices. The cable’s length offers flexibility in placement and connection, while the 0.9 A current limit matches typical USB port output, ensuring safe operation within USB specifications.

Suitable for

• Small electronics requiring 5 V DC with EIAJ-01 (2.5/0.7 mm) input
• Portable devices powered from a laptop or power bank
• Replacing or simplifying bulky external PSUs during travel

Key specifications

• Cable length: 1.5 m
• Connector 1: USB A
• Connector 2: EIAJ-01 barrel, 2.5 mm outer / 0.7 mm inner
• Input voltage: 5 V DC
• Maximum current: 0.9 A
• Colour: Black
• Brand: Lindy
• MPN: 70265
• EAN: 4002888702652

How to use

Insert the USB A plug into a powered USB port on a computer, USB charger or power bank. Connect the EIAJ-01 barrel plug to the device’s 2.5/0.7 mm DC input. Verify that the device requires 5 V and that its current draw does not exceed 0.9 A. If the device does not power on, disconnect and check the connections and power source.

Recommendations

Use only with devices specified for 5 V DC input and compatible barrel dimensions (2.5 mm outer, 0.7 mm inner). Do not exceed the 0.9 A current limit; for higher-current devices use an appropriate power supply. Avoid routing the cable near heat sources and inspect connectors for damage before use.