Lindy 5m, CEE 7/7 - IEC 320 C5 negro conector hembra CEE7/7 C5

The Lindy 5m CEE 7/7 - IEC 320 C5 cable provides a reliable mains connection with a CEE 7/7 plug on one end and an IEC 320 C5 (cloverleaf) coupler on the other. With a 5 m length and a black finish, the cable is suitable for flexible placement of equipment in both professional and private environments, including recording studios, lighting systems and event locations.

Advantages

This power cable offers compatibility with devices that accept an IEC 320 C5 inlet and mains sockets using the CEE 7/7 plug. The 5 m length enables greater layout flexibility while the cable is designed for continuous use in environments with operating temperatures between −10 °C and 70 °C, allowing use in non-air-conditioned areas.

Suitable for

• Recording studios
• Lighting and stage systems
• Event venues and temporary installations
• Home and office equipment with IEC C5 inlet (laptops, small power supplies)

Key specifications

• Cable length: 5 m
• Connector 1: CEE 7/7 plug
• Connector 2: IEC 320 C5 coupler
• Colour: Black
• Operating temperature range: −10 °C to 70 °C
• Brand: Lindy

How to use

Insert the CEE 7/7 plug into a compatible mains socket and connect the IEC 320 C5 coupler to the device’s C5 inlet. Route the cable to avoid sharp bends and tripping hazards; ensure connections are fully seated before powering the device. Use the full 5 m length to position equipment as required for your setup.

Recommendations

Do not exceed the rated current of the connected devices and avoid exposure to liquids. For permanent installations, check local electrical codes and ensure the cable remains undamaged; replace the cable if the insulation shows wear.