Manhattan Switch HDMI 2 puertos, 1080p, conecta 2 fuentes HDMI a 1 pantalla, conmutación automática y manual (por botón), no requiere alimentación externa, Negro, tres años de garantía

The Manhattan 1080p 2-Port HDMI Switch (model 207911) lets you connect two HDMI video sources to a single high-definition display. It supports full 1080p resolution and 3D video, and is compatible with LPCM, DTS and Dolby TrueHD audio formats. The compact, black unit requires no external power and is suitable for use with HDTVs, flat-panel monitors and projectors.

Advantages

The switch offers both automatic source detection and a manual selection button for cases when multiple HDMI sources are active. Full compliance with HDMI and HDCP 1.0/1.1 standards ensures reliable signal transmission and image quality. Its small form factor and plug-and-play operation make installation straightforward without additional power adapters.

Suitable for

• Connecting two gaming consoles to one TV or monitor
• Switching between a Blu-ray player and a set-top box
• Routing video sources to a projector in a small meeting room
• Home entertainment setups with limited HDMI inputs

Key specifications

• Model: Manhattan 207911
• Ports: 2 × HDMI inputs, 1 × HDMI output
• Maximum resolution: 1080p; 3D video supported
• HDMI/HDCP compliance: HDMI, HDCP 1.0 and 1.1
• Audio support: LPCM, DTS, Dolby TrueHD
• Power: no external power required (bus-powered)
• Colour: Black
• Weight: 0.03 kg

How to use

Connect two HDMI source devices (for example, a console and a Blu-ray player) to the switch inputs and connect the switch output to your TV, monitor or projector using an HDMI cable. The switch will automatically detect the active source and route the signal to the display. If both sources are powered on at the same time, press the manual selection button on the unit to choose the desired input. No external power adapter is required.

Recommendations

For best results use high-quality HDMI cables and keep cable lengths within 5 metres where possible to maintain signal integrity. Place the switch in a well-ventilated location and avoid stacking heavy equipment on top of it.