Marco de fotos individual Walther Design KV130S

Single picture frame Walther Design KV130S is a rectangular plastic frame available in a variety of formats and colours. The frame for this model is produced in two sizes; the larger format corresponds to 30 x 45 cm (11 3/4 x 17 3/4 in). The frame accepts clear washed glass, a light grey perforated inlay (available for 21 x 30 cm / 8 1/4 x 11 3/4 in), and a hardboard back with a put-up hinge for sizes up to 20 x 25 cm (8 x 10 in). Suspension is by hangers with clips, with two additional jumbo hangers for sizes from 30 x 40 cm (11 3/4 x 15 3/4 in). The sealing system uses turn clips, and packaging is shrink-wrapped foil with protective corners for sizes from 20 x 30 cm (8 x 11 3/4 in).

Advantages

The Walther Design KV130S frame is lightweight and durable thanks to its plastic construction, and it is offered in multiple colour options including silver, black, gold, steel, bronze, yellow, green, blue, red, white and taupe. Its clear washed glass provides a clean view of the picture while the hardboard back and turn-clip sealing system ensure secure mounting. Formats and suspension options cover small to larger prints, and the included protective packaging reduces the risk of damage during transport.

Suitable for

• Displaying single photos and prints sized to the frame formats (including 21x30 cm and 30x45 cm)
• Home and office wall mounting using hangers with clips
• Framing pictures that require a bevelled mount or inlay

Key specifications

• Brand: Walther Design
• Model / MPN: KV130S
• Material: plastic frame, clear washed glass, hardboard back
• Available colours: silver, black, gold, steel, bronze, yellow, green, blue, red, white, taupe
• Available formats: up to 30 x 45 cm (11 3/4 x 17 3/4 in); inlay format 21 x 30 cm (8 1/4 x 11 3/4 in)
• Back: hardboard with put-up hinge (up to 20 x 25 cm / 8 x 10 in)
• Suspension: hangers with clips; two jumbo hangers for sizes from 30 x 40 cm
• Sealing: turn clips
• Packaging: shrink-wrapped foil with protective corners (from 20 x 30 cm)
• EAN: 4004122207787

How to use

Open the frame by turning the turn clips and remove the backboard. Place the photo or print onto the clear washed glass, add the light grey perforated inlay if required for the 21 x 30 cm format, then replace the hardboard back and secure the turn clips. Use the hangers with clips to mount the frame on the wall; for larger sizes (from 30 x 40 cm) attach the additional jumbo hangers as provided. Handle the glass and inlay carefully to avoid fingerprints and dust when assembling.

Recommendations

Store and transport the frame in its shrink-wrapped packaging with protective corners until installation. For best results use appropriate wall fixings that match the frame size and the wall type, and clean the glass with a non-abrasive glass cleaner before inserting the picture.