Mean Well KAA-4R4V-10S Actuador de regulación KNX/DALI de 4 canales

The KAA-4R4V-10S bridges KNX TP1 and DALI, controlling four independent DALI channels with up to ten slaves each. Unlike single-protocol dimmers, it combines a KNX bus interface with a 100-240V AC auxiliary supply and 16V DC DALI output, enabling group, scene, and broadcast dimming from 0-100% without additional gateways.

Highlights

• 4 independent DALI channels, max. 10 DALI slaves per channel
• Supports 16 groups and 16 scenes per channel
• KNX TP1 input, DALI output per IEC 62386
• DIN rail mounting, 4 module width
• Configuration via ETS software

In daily use

Mount the actuator on a DIN rail and connect the KNX bus and DALI lines. The auxiliary power input accepts 100-240V AC, while the DALI outputs deliver 16V DC at up to 250mA per channel. Use ETS to assign individual, group, scene, or broadcast addresses. The operating temperature range is -20 to +50°C.

Full specifications

• Number of channels: 4
• Input protocol: KNX TP1
• Output protocol: DALI (IEC 62386)
• Max. DALI slaves per channel: 10
• Max. DALI groups per channel: 16
• Max. DALI scenes per channel: 16
• KNX bus voltage: 21-30V DC
• Auxiliary power supply: 100-240V AC (50/60Hz)
• DALI output voltage: 16V DC
• DALI output current: max. 250mA per channel
• Dimming range: 0-100%
• Mounting type: DIN rail
• DIN module width: 4 units
• Operating temperature: -20 to +50°C
• Storage temperature: -25 to +70°C
• Protection rating: IP20
• Certification: CE, KNX
• Configuration software: ETS
• Control functions: Individual, Group, Scene, Broadcast

Final note

The KAA-4R4V-10S is a compact solution for KNX installations requiring multi-channel DALI dimming with advanced scene and group control.