Meanwell HLG-240H-C700B driver LED 240W 700mA corriente constante IP67

The Meanwell HLG-240H-C700B is a high-efficiency, constant current LED driver from the renowned HLG-240H series. With an output power of 240W and a current of 700mA, it is designed to power high-power LED lighting systems. Its wide input voltage range (90-305VAC) and IP67 rating make it suitable for both indoor and outdoor applications. The driver features active PFC and 3-in-1 dimming (0-10VDC, PWM, resistance), providing flexibility for various lighting control systems.

Advantages

High efficiency up to 94% reduces energy loss and heat generation. The IP67 rating ensures protection against dust and water ingress, making it ideal for harsh environments. Active PFC complies with harmonic current standards, and the built-in protections (short circuit, over current, over voltage, over temperature) ensure reliable operation and long lifespan.

Suitable for

• High-bay and low-bay lighting
• Street lighting
• Floodlighting
• Industrial and commercial LED fixtures
• Outdoor signage and architectural lighting

Key specifications

• Output Power: 240W
• Output Current: 700mA
• Output Voltage Range: 171-343VDC
• Input Voltage Range: 90-305VAC / 127-431VDC
• Efficiency: Up to 94%
• IP Rating: IP67
• Dimming: 3-in-1 (0-10VDC, PWM, Resistance)
• Power Factor Correction: Active PFC
• Protections: Short Circuit, Over Current, Over Voltage, Over Temperature
• Operating Temperature: -40°C to +90°C (case)
• Certifications: UL, CUL, TUV, CE, CB
• Driver Type: Constant Current (C.C.)
• Housing Material: Aluminum
• Cooling: Free Air Convection
• Withstand Voltage: I/P-O/P: 3.75KVAC, I/P-FG: 2KVAC, O/P-FG: 1.5KVAC
• MTBF: >182K hrs min. MIL-HDBK-217F (25°C)
• Harmonic Current: Complies with EN61000-3-2 Class C (>60% load)
• Setup Time: 500ms/115VAC, 300ms/230VAC (at full load)

Recommendations

For optimal performance, ensure proper ventilation and mounting on a heat-sink surface. This driver is suitable for use with LED modules requiring constant current drive at 700mA. Always verify compatibility with your LED load voltage range.